Replacement disc brake pads for SRAM road hydraulic (HRD) and Level calipers, steel-backed, sold as a complete pad kit. Pads are a wear item: SRAM's limit is a 3 mm total thickness of pad plus backing plate, so check yours monthly and swap before they get that thin.

The organic (resin) pad gives a strong bite from the first touch of the lever with little noise, and it beds in fast. It's what SRAM ships on road hydraulic brakes as stock, and it's the right call for most dry-weather commuting and road miles.

The sintered metallic pad holds up to sustained heat and performs better in wet or gritty conditions, at the cost of a little more noise. Choose it if you ride long loaded descents or a lot of rain.

Each kit fits one caliper and includes two pads, the pad spreader spring, the pad pin, and the retaining clip, everything you need for the swap. You'll need one kit per caliper, so two for front and rear.

SRAM uses several pad shapes across its road, Level, and mountain calipers, and the wrong shape won't seat. Email us your brake model or a photo of the old pad and we'll match the exact part before it ships.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
The organic kit (SRAM part 00.5318.024.001, shape 37) fits SRAM road hydraulic disc (HRD) and 2-piece Level calipers, including Apex, Rival, Force, and Red AXS, plus SRAM DB1/3/5 and Avid Elixir/X0/XX. It does not fit SRAM's one-piece Monoblock calipers, which use a side-positioned mounting arm, send us your brake model if you're unsure.
Organic is the quiet pad with a strong initial bite and is the right choice for everyday dry road riding; it's what SRAM ships as stock. Sintered metal resists heat better and works better in wet or gritty conditions for long or loaded descents, with a little more noise. SRAM recommends a fresh rotor when you switch between compounds.
One kit covers one caliper, so order two if you're replacing front and rear. Each kit includes two pads, the pad spreader spring, the pad pin, and the retaining clip.
SRAM's limit is a total thickness of 3 mm for the pad and steel backing plate together. Inspect monthly, or more often if you ride in sand or grit, and replace before you reach that point.
Yes. We service hydraulic disc brakes at Propel and can match the right pad shape, swap them, and bed them in. Add the kit to your cart, or email us your brake model and we'll confirm the exact part and help you order.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.