A pair of dust wiper seals for SR Suntour suspension forks built on 32mm stanchions, the wear part you replace at a lower-leg service to clear out grit and keep the fork sliding smoothly. It fits SR Suntour fork models that use a 32mm upper tube; if you're not sure which fork is on your bike, send us the model and we'll confirm before you order.

Sized for SR Suntour forks with 32mm stanchions (the polished upper tubes that slide into the lowers). The wiper diameter has to match the stanchion, so this is a fit-by-fork-model part, not a universal seal.
Wiper seals are a consumable. Swapping them during a lower-leg service is the cheapest way to keep an air or coil fork feeling smooth and to stop dirt from scoring the stanchions.
Replace if you see oil weeping past the wipers, feel new stiction or notching in the travel, or you're already in there for the annual lower-leg oil change.
It fits SR Suntour forks with 32mm stanchions. Several Suntour models use a 32mm upper tube, so the safest move is to tell us your exact fork model (it's usually printed on the lower leg or the back of the crown) and we'll confirm before you order.
The front suspension fork. Dust wiper seals live at the top of the fork lowers, where the stanchions enter. This is not a rear-shock or rear-rack part.
Wiper seals are usually replaced alongside fresh lower-leg oil, and on some forks a foam ring sits behind the wiper. Tell us your fork model and how you ride and we'll point you to the full small-parts list so you only order this once.
Order it, ask us about fit, or book an install at the Brooklyn shop.