A 180mm Shimano SM-RT64 Center Lock rotor with an external-spline lockring, the Deore-level disc that ships on a lot of the e-bikes and trekking bikes we sell. It's a direct replacement for a worn or warped 180mm Center Lock rotor on a hydraulic or mechanical Shimano disc setup.
The SM-RT64 is Shimano's Deore-class Center Lock rotor, and it's one of the parts we replace most often on e-bikes running Shimano hydraulic brakes. Rotors wear, warp from heat, or get scored over time, and a worn rotor is one of the most common reasons brakes feel grabby or noisy.
It's a two-piece steel rotor with a steel carrier, rated for both resin and metal (sintered) pads. That covers nearly every repair situation, so you don't have to also swap pad type to match the rotor.
Pick 160mm or 180mm to match the size already on your bike, and check that your hub is Center Lock, meaning a splined center with an external lockring, not a 6-bolt pattern. Getting the size and mount right is the whole job here, since the wrong fitment means the part won't go on.
We stock the 160mm and 180mm SKUs because they cover most commuter and e-bike setups. The SM-RT64 line is also made in 140mm, 203mm, and 220mm, so if your bike runs a larger rotor, email us and we'll order the right one.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Match what's on your bike now. Look for the size laser-etched on your current rotor, or measure the outer diameter. The 160mm is the RT64-S, the 180mm is the RT64-M. Different diameters require a matching caliper mount adapter, so changing size is more than just swapping the rotor.
Only if your hub is Center Lock, meaning it has a splined center with a threaded lockring rather than a six-bolt pattern. This is the external-lockring version, which uses a standard cassette/Center Lock lockring tool to install. If your hub takes six bolts, you need a 6-bolt rotor instead.
Yes. The SM-RT64 is rated for both resin and metal pads, so you can keep whatever pad type your brakes already use, or switch, without worrying about the rotor.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.