Genuine Shimano G04S replacement pads in the G-shape, with a metal (sintered) compound built for strong, heat-tolerant stopping. They drop into Shimano calipers that use the G-shape pad, which covers many of the 2-piston hydraulic disc brakes found on the bikes we sell. Metal pads trade a little extra noise when cold for better bite and longer life in wet, gritty, or heavy-load riding, so they're a sensible pick for e-bikes and cargo setups.

Sintered pads hold up to heat and last longer than resin, with strong bite in wet and loaded conditions. The tradeoff is a bit more noise until they warm up.
These are the G-shape pad used across many Shimano 2-piston hydraulic calipers. Match the G-shape to your caliper before ordering, since Shimano uses several different pad shapes.
Factory Shimano pads, not a generic aftermarket copy, so the backing plate and compound match what your brake was designed around.
They fit Shimano calipers that use the G-shape pad, which is common on 2-piston hydraulic disc brakes. Pad shape varies across Shimano's lineup, so check your caliper or send us your brake model and we'll confirm the G-shape is correct.
Metal (sintered) pads like the G04S resist heat better, last longer, and bite hard in wet or heavy-load riding, with a little more cold-start noise. Resin pads are quieter and grab fast when cold but wear faster under heat. For e-bikes and cargo use, many riders prefer metal.
Metal pads need a rotor rated for metallic compound. Most Shimano rotors are, but if your rotor is resin-only it can wear quickly or run loud. If you're unsure, tell us your rotor model and we'll check.
Order it, ask us about fit, or book an install at the Brooklyn shop.