A pre-bled Shimano Deore hydraulic disc brake set, BL-M6100 lever and BR-M6100 2-piston caliper, ready to bolt on. This is the Deore-tier (M6100, 12-speed series) brake most mid-range commuter and e-bikes run from the factory, so it's the natural replacement when a caliper gets damaged in a crash, a lever cracks, or you're rebuilding after a frame swap.
Available in-store and by order. Ask us and we’ll have it ready.

Bleeding a hydraulic brake is the fiddly part of the job. This set arrives pre-bled from Shimano with the hose filled, so a caliper or lever swap is mostly bolt-on: mount the caliper, clamp the lever, align to the rotor, done.

Each listing is one side. The front/left set ships with a 1000 mm hose; the rear/right set ships with a 1700 mm hose to reach the back of the frame. Pick the side that matches the brake you're replacing, or grab both to refresh the whole bike.
Deore M6100 is the 2-piston brake that comes stock on a lot of mid-range commuter and e-bikes. It's a step up from the entry MT200 in lever feel and serviceability, and it shares pads and mineral-oil service with the rest of Shimano's lineup, so parts are easy to keep on hand.
It uses Shimano mineral oil (never DOT fluid) and ships with resin pads. The caliper is post mount, so it bolts to post-mount frame and fork tabs; the rotor and the adapter that sets your rotor size aren't included.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It's a complete one-side set: the BL-M6100 lever and the BR-M6100 caliper, joined by a pre-filled hose and bled at the factory. You add a rotor and the correct mount adapter for your bike.
Order by the corner you're fixing. The front/left set has a 1000 mm hose; the rear/right set has a longer 1700 mm hose to reach the back of the frame. If you're replacing both, buy one of each.
No. The rotor and the mount adapter that matches your rotor size are sold separately, because the right adapter depends on your frame, fork, and rotor diameter. Email us your bike and we'll spec them.
Shimano mineral oil, never DOT fluid, which would damage the seals. It ships with resin pads, and you can switch to metal pads later if you want more bite or heat resistance.
The caliper is post mount, so it fits any frame or fork with post-mount brake tabs once you add the adapter for your rotor size. It's the Deore-tier brake found on many mid-range commuter and e-bikes. If you're unsure, send us the bike and we'll confirm before it ships.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.