2026-10-11 Rohloff content build: created unpublished; title/sku mirrored verbatim from Lightspeed; price left to price-follow.
The M10x1 cap nuts and washers that clamp a TS (solid threaded axle) Speedhub into the frame. They're for TS hubs only, not quick-release CC or thru-axle A12, and the one rule is Rohloff's limit of 35 Nm (310 in-lb), because an over-tightened axle can bind the hub's internals.

If the axle ends are threaded and held with nuts, it's a TS. If there's a quick-release skewer, it's a CC; if it bolts into a 12 mm thru-axle frame, it's an A12.
No more than 35 Nm (310 in-lb), with a 15 mm wrench.
Over-tightening the axle can put pressure on internal parts. Rohloff lists it as one cause of the hub free-spinning after a gear change.
Order it, ask us about fit, or book an install at the Brooklyn shop.