Rohloff’s flange support rings reinforce the spoke flanges of a SPEEDHUB so a heavy e-cargo wheel keeps its spoke tension even if a flange ever cracks. The spoke flange takes the full beating of a loaded wheel, and on a cargo bike or a 28 mph e-bike that load is constant.
The spoke flange carries the entire load path from rim to hub. The ring backs it up so that, in the rare event the aluminum flange cracks, the spokes don’t all release at once, the wheel stays together and ridable instead of failing suddenly.
Rohloff recommends them for e-bikes, cargo bikes, tandems, and heavy touring, and for a rider-plus-load over 220 lb (100 kg). If your SPEEDHUB lives on a loaded cargo bike or a 28 mph e-bike, this is the use case they were made for.
Hubs built before fall 2017 didn’t ship with them. The right time to add them is when the wheel is next re-laced or rebuilt, they go on before lacing, so retrofitting mid-build isn’t practical.
Older hubs (“Made in Germany” not underlined) take 2 small rings; newer hubs (underlined mark, with a taller grooved flange on the hub-cap side) take 1 small + 1 large. We read the casing to confirm which your hub needs before ordering.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
They reinforce the two spoke flanges on a Rohloff SPEEDHUB. The flange takes the full load of a laced, tensioned wheel; the ring backs it up so that if a flange ever cracks, the spokes hold instead of releasing all at once, leaving you a safe, ridable wheel.
Rohloff recommends them for high-load use: e-bikes, cargo bikes, tandems, heavy touring, and riders whose total weight plus load is over 220 lb (100 kg). Every SPEEDHUB kit built from fall 2017 already includes them; older hubs should get them at the next re-lace.
It depends on your hub. Hubs where “Made in Germany” is not underlined take 2 small rings (Rohloff art. 8523). Newer hubs with the underlined mark have a taller, grooved flange on the hub-cap side and take 1 small + 1 large (art. 8524). Send us a photo of the hub casing or bring it in and we’ll confirm.
No, they sit against the flange before the spokes are laced, so they’re fitted during a wheelbuild or re-lace, not as a bolt-on. We add them whenever we’re lacing or re-lacing a SPEEDHUB wheel.
Email us with your SPEEDHUB version (or a photo of the “Made in Germany” marking) and we’ll get you the correct set and book the wheel work if you need it.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.