Rohloff's 14-speed gearbox (526% range, even 13.6% steps) in the thru-axle, disc-brake hub shell: the bare mechanical twist-shift SPEEDHUB for lacing into a custom wheelbuild. It fits frames with a 0.47 in (12 mm) thru-axle, and its Postmount caliper bone steps a 6.3 in (160 mm) rotor mount up to 7.1 in (180 mm), or 180 up to 203, so confirm your exact frame and rotor before the build.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

The whole 14-speed gearbox lives inside the hub shell, sealed in an oil bath. 526% range with even 13.6% steps means no awkward jumps and no overlap, and there is no cassette, no derailleur, and no hanger hanging off the back of the bike to bend or wear out.

Because the gears are internal, you can shift while coasting, mid-pedal, or stopped at a light. Roll up to a red in the wrong gear and you still pull away in the right one. That is the thing a derailleur cannot do.
Rohloff costs more up front and earns it back over years: one oil change a year instead of chains, cassettes, and hangers. If the answer to "how long do you want this bike" is "forever," this is the drivetrain. Field hubs have logged well past 100,000 mi.
This is the bare A12 disc hub, not a finished wheel and not the E-14 electronic version. Choose it to build a fresh wheel around an existing twist shifter, swap a worn shell, or spec a thru-axle touring or cargo frame from scratch. We lace and true the wheel in-house.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
A12 is the 12 mm thru-axle version of the SPEEDHUB. DB is the disc-brake interface (IS2000 4-bolt rotor mount). PM is the Postmount caliper "bone" it ships with, which also steps a 160 mm rotor up to 180 mm, or 180 up to 203. It is the mechanical hub, not the E-14 electronic shifter.
A12 fitment is exact. Thru-axle dropouts are not fully standardized, so the frame needs to be measured before you build. It comes in 142 mm and 148 mm Boost (32 or 36 hole, any color) plus 177 mm and 197 mm (32 hole, black only). Email us or bring the frame in and we will measure the dropouts before ordering.
No. This is the bare hub shell. It needs to be laced to a rim with the matching 32 or 36 spokes and built into a wheel. We do the wheelbuild in Brooklyn.
Not this version. This is the mechanical twist-shift hub and needs a Rohloff shifter and cables. The E-14 electronic shifter, used on Bosch-powered e-bikes for push-button shifts, is a separate option that mounts to the same hub family.
One oil change a year or every 3,100 mi (5,000 km), 25 ml of Rohloff oil, a cleaner pass and a runner pass. Otherwise you watch the belt or chain like any drivetrain. The gearbox internals are sealed and are not user-serviceable; a hub with an internal fault returns to Rohloff.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.