The Rohloff Speedhub 500/14 TS OEM2 is the German-made 14-speed internal gear hub fitted to Tern and Riese & Müller Rohloff e-bikes, with the whole gearbox sealed in an oil bath inside the rear wheel. Fourteen evenly spaced gears cover a 526% range, shift under load or at a standstill, and need one 0.85 oz (25 ml) oil change a year (about every 3,100 mi).
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

A complete 14-speed gearbox lives inside the rear hub in a sealed oil bath, spanning a 526% range with an even 13.6% jump between gears. No derailleur to knock out of alignment, no cassette or chain to wear out, and the gears stay clean through rain, road salt, and winter slush.

The Speedhub shifts crisply while you are pedaling hard and even when you are stopped at a light, dropping to your start gear before pulling away with a loaded bike. That is the behavior a heavy e-cargo bike rewards, and something a derailleur cannot do.

OEM2 is the axle-plate torque mount used on OEM e-bike frames, and the TS solid axle is the touring-spindle standard. This is the exact hub configuration found on the Tern GSD R14 and Riese & Müller Charger, Multicharger, Delite, and Superdelite Rohloff trims.

Choose the Speedhub when you ride year-round and want to stop thinking about the drivetrain. Versus an enviolo CVT (internal gear hub with smooth, stepless ratios), Rohloff gives you a wider 526% range and higher efficiency, which pays off on hills and under cargo; enviolo trades some of that for a stepless feel at a lower price.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
OEM2 is the axle-plate torque mount used on OEM e-bike frames, with the TS solid threaded (M10 x 1) axle. It is the Rohloff configuration on the Tern GSD R14 and Riese & Müller Charger, Multicharger, Delite, and Superdelite Rohloff trims. If you are replacing or building a wheel, confirm your frame uses the OEM2 plate and a 135 mm rear spacing before ordering. Email us and we will check your bike.
No. This SKU is the hub itself. On Bosch e-bikes the Rohloff is shifted by the separate E-14 electronic shifter (180 ms shifts, with an auto-downshift to your start gear when you stop). The mechanical version uses an external twist-shifter. Tell us your bike and we will spec the right shifting setup.
One oil change of 25 ml of Rohloff oil, about every 3,100 mi (5,000 km) or once a year. Otherwise there is no derailleur to adjust and no cassette to replace. The internals are sealed and not user-serviceable; if the gearbox ever fails it returns to Rohloff, but the hub is rated for 100,000+ mi.
Both are offered. 36-hole builds a stronger wheel and is the common choice for heavy e-cargo and loaded touring; 32-hole is fine for lighter trekking and city use. If you are matching an existing rim, count its spoke holes. Not sure? Send us your bike and rim and we will confirm.
Yes. The Speedhub runs a chain or a Gates Carbon Drive belt, and on most Propel Rohloff e-bikes it is paired with a Gates belt for quiet, grease-free, low-maintenance miles. The hub uses an M34 x 6 sprocket thread, 16T standard.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.