Complete Speedhub 500/14 internal gear hub: 14 evenly spaced gears with 526% total range, sealed in an oil bath that asks for service every 3,100 mi (5,000 km). You can shift at any time, including at a standstill.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

A complete 14-speed gearbox lives inside the hub shell, sealed in an oil bath. The 526% range in even 13.6% steps spans about what a road triple plus an 11-speed cassette would, but with nothing exposed to bend, snap, or wear out. Grit, salt, and weather stay outside the shell.

Routine service is a single 25 ml oil change every 3,100 mi (5,000 km) or once a year. Rohloff cites real-world hubs past 500,000 km still in service.

The mechanical twist-shifter lets you change gear while pedaling or while stopped at a light, so you roll away in the right gear every time. The hub runs a Gates Carbon Drive belt or a standard chain, which is why it pairs so well with low-maintenance commuter and cargo builds.

Versus an enviolo CVT, the Rohloff gives you 14 distinct, repeatable gears and a wider span instead of a stepless ratio you set by feel. Versus a Shimano Alfine 8- or 11-speed, it is the 14-speed, 526% reference hub.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
CC is the hollow axle for a standard quick-release skewer; DB is the disc-brake hub-cap with a 4-hole rotor mount; OEM is the axle-plate torque anchor designed for frames with reinforced, elongated vertical dropouts. It is the configuration most modern disc-brake e-bikes are built around.
No. This is the mechanical twist-shift hub. The E-14 is a separate electronic shifter used on some Bosch e-bike trims. If your bike was spec'd with E-14 electronic shifting, email us and we'll point you to the right part.
It needs a 135 mm rear spacing, disc brakes, and a frame with reinforced elongated vertical dropouts to use the OEM axle plate. It builds into a 32- or 36-hole wheel and runs a belt or a chain. Send us your bike or frame and we'll confirm fit before you order.
One 25 ml oil change every 3,100 mi (5,000 km) or once a year. There is no derailleur to adjust and no cassette to replace. We do the oil change and setup in Brooklyn.
This is the hub on its own. We can build it into a wheel with the spokes and rim for your bike, install it, and dial in the shifting. Email us to order and we'll spec the build with you.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.