The Rohloff Monkey Bone anchors a SPEEDHUB OEM2 axle plate and converts a frame’s IS brake tabs to a Postmount caliper interface. Use it when the frame has an IS mount at the dropout and the brake uses a Postmount caliper.
Available in-store and by order. Ask us and we’ll have it ready.

A Speedhub reacts its gearbox torque against the frame instead of a derailleur hanger, so the axle has to be held from rotating. The Monkey Bone gives the OEM2 axle plate that pickup point and, in the same bracket, turns the frame's IS brake tabs into a Postmount mount.

Reach for the Monkey Bone when the frame has International Standard brake tabs on the dropout, you're running (or want to run) a Postmount caliper, and the Speedhub is set up with the OEM2 axle plate. Pick the bone that matches your rotor: 160mm or 180mm, with 203mm available on the 180mm using spacers.
Rohloff makes a family of torque anchors for non-OEM frames. The Speedbone sits on the outside of the IS tabs; the Monkey Bone sits on the inside and doubles as the PM brake adapter.
Choose the 160 or 180 mm version by rotor size; the 180 mm version supports a 203 mm rotor with spacers. It does not fit frames that already use Postmount, an IS direct-mount caliper, or a chainstay brake mount. Send us the frame details if you want us to confirm fitment.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It fits a frame that has International Standard (IS) disc-brake tabs on the rear dropout and you're pairing it with a Postmount caliper and a Speedhub running the OEM2 axle plate. It does not fit frames that already have a Postmount mount, IS direct-mount calipers, or brake mounts located on the chainstay. If you're not sure what your frame has, email us a photo of the dropout and we'll confirm.
Match the bone to your brake rotor: the 160mm bone for a 160mm rotor, the 180mm bone for a 180mm rotor. If you want a 203mm rotor, use the 180mm bone plus spacers (sold separately).
Yes. The Monkey Bone is the frame-side pickup point for the OEM2 axle plate. The two work together to keep the Speedhub axle from rotating. If your Speedhub has a different axle plate (standard long arm or OEM), the Monkey Bone is not the right anchor.
Both anchor the Speedhub to a frame with IS brake tabs, but the Speedbone mounts on the outside of the tabs and keeps your existing brake bracket, while the Monkey Bone mounts on the inside and also serves as the Postmount brake adapter. The Monkey Bone is the choice when you want a clean Postmount caliper setup.
Yes. We build and service Rohloff drivetrains at our Brooklyn shop, including axle-plate setup, torque-anchor fitment, and E-14 calibration. Email us to order or to talk through the right bone and axle-plate combination for your frame.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.