Rohloff's brake-mount adapter that anchors a Speedhub to wide fatbike and cargo frames (190/197 mm dropouts) and turns IS into post mount. The Speedhub puts a lot of torque into the frame, so it needs a fixed pickup point that keeps the axle from rotating.
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

An internal gear hub doesn't react torque through a derailleur hanger, the whole hub wants to spin. The Monkey Bone bolts to the frame's IS disc tab and gives the OEM2 axle plate a fixed anchor, so the hub stays put and your power goes to the wheel instead of into twisting the axle.
It also converts the frame's IS disc mount to a post-mount caliper interface, so you can run a modern post-mount brake on an older IS frame without a separate adapter stack.
The “-10” adds a 10 mm offset for 190 mm and 197 mm O.L.D. dropouts, fatbike and heavy-cargo builds running the wide XXL Speedhub. On a standard-width frame you want the plain Monkey Bone instead; this offset version won't line up.
Rohloff is explicit: on some frames the reaction force in the lowest gears can push the axle down and out of the dropout. We check that the OEM2 anchor sits behind the dropout-slot line before we build, so the wheel can't walk out under load.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It anchors the Rohloff Speedhub's OEM2 axle plate to the frame through the disc-brake mount, and at the same time converts an International Standard (IS) disc tab to a post-mount (PM) caliper interface. It's what keeps the hub from rotating under the torque it generates.
The -10 has a 10 mm offset built in for wide frames, 190 mm and 197 mm O.L.D. dropout spacing (fatbike and heavy-cargo Speedhub builds). The standard Monkey Bone is for normal dropout widths. They are not interchangeable, so match the part to your frame's spacing.
Order the version that matches your rotor: 160 mm or 180 mm. The size is engraved on the adapter. If you run a 203 mm rotor, use the 180 mm Monkey Bone with Rohloff's spacer kit (sold separately).
Almost, with one important exception. Your frame needs an IS disc tab, a post-mount caliper, and a Speedhub with an OEM2 axle plate. Rohloff warns against frames where the axle-plate anchor sits forward of the dropout-slot line, because the hub's low-gear reaction force can pull the axle out of the dropout. We check the dropout geometry before fitting one.
It can be, with the right torque values (M6 bolts to frame and caliper at 6 Nm, axle-plate screws at 3 Nm) and a careful look at the dropout geometry. Because the fit check is a safety step on a Speedhub build, most riders have us do it. Email us to order or to confirm the fit for your bike.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.