2026-10-11 Rohloff content build: created unpublished; title/sku mirrored verbatim from Lightspeed; price left to price-follow.
Rohloff's socket for the lock-ring that holds a Gates belt sprocket on a Speedhub, so you can torque it to the 30 Nm spec. It's for belt bikes on the Splined Carrier L or SL (8540L/8540SL), and it takes a ½ in square-drive torque wrench to hit 30 Nm (22 ft-lb), dry.

If your Speedhub runs a Gates belt and the sprocket is held by a notched ring marked "close" and "30 Nm", that's the lock-ring this tool fits (on carrier 8540L or 8540SL).
30 Nm (22 ft-lb). Rohloff says not to use thread locker on it.
Counterclockwise. Hold the belt sprocket while you loosen it.
No. Chain setups on the standard or slim carrier use a snap ring instead of a lock-ring.
Order it, ask us about fit, or book an install at the Brooklyn shop.