The gasket that seals a Speedhub's hub cap to the shell, for hubs with a 36-hole hub cap. Rohloff treats seals and gaskets as wear parts, so it's for anyone refitting a hub cap, paired with new hub cap screws torqued to 4 Nm (35 in-lb).
It fits a SPEEDHUB 500/14 with a 36-hole hub cap. If your hub is laced with 32 spokes, you need the 32H gasket.
Whenever the hub cap comes off. Seals and gaskets are wear parts on the Speedhub.
4 Nm (35 in-lb), with a TX20 Torx bit.
Order it, ask us about fit, or book an install at the Brooklyn shop.