The anodized plate that keys onto a Speedhub axle and passes its torque to the frame, picked by axle type and frame anchor. Match it to your axle (CC, TS or A12) and how the frame takes torque (standard arm, OEM dropout, OEM2 with a Speedbone or Monkey Bone, or PM with the PM Bone).
We do not have a live stock feed for this one. Ask us and we check with the brand or our distributor, then confirm the price and the date with you before anything is charged.

An internal gear hub holds all 14 speeds in the rear hub, so the axle constantly tries to rotate against the frame under load. The axle plate keys onto the axle and bolts to the frame to absorb that torque, without it, the hub can’t be safely anchored.

The plate is what makes one Speedhub fit many frame standards. Choosing it by axle type (CC / TS / A12) and by how your frame anchors (standard, OEM, OEM2, PM) is the difference between a hub that drops in and one that won’t.

You’re moving a Speedhub into a different frame, switching dropout standards, or building a new wheel, the axle plate is the piece that has to match the new frame, even when the hub itself carries over.

The "Long" plates add an extended threaded stub past the dropout, the standard way to hang a trailer hitch or a second bracket off a Rohloff rear end.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It comes down to two things: your hub’s axle (CC for a quick-release/hollow axle, TS for a solid threaded M10x1 axle, A12 for a 12 mm thru-axle frame) and how your frame anchors the torque (standard long-arm, OEM for Rohloff-specific dropouts, OEM2 for frames using the lower IS-1999 disc mount, or PM for post-mount disc frames with the PM Bone). If you’re not sure, send us the bike and the hub’s axle code and we’ll confirm it.
OEM plates are for frames built with dedicated Rohloff dropouts. OEM2 plates anchor to the frame’s lower IS-1999 disc-brake mounting hole instead, which is what most modern disc frames provide. They are not interchangeable, the frame decides which one you need.
The Long plates have an extended threaded stub that reaches past the dropout, giving you a mounting point for a trailer hitch or an extra bracket. Choose it only if you actually need that mount; otherwise the standard length is correct.
Yes, Rohloff recommends fitting fresh axle-plate Torx screws whenever you change the plate, since they’re torqued into the hub. We sell the screw set separately and include it on any plate change we do in the shop.
Yes. The axle plate is external, it bolts to the axle and frame and doesn’t require opening the sealed gear internals. It’s a wear/conversion part, not a hub overhaul.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.