2026-10-11 Rohloff content build: created unpublished; title/sku mirrored verbatim from Lightspeed; price left to price-follow.
The six M4 Torx screws that fasten a Speedhub's axle plate, so a plate swap goes back together on fresh screws. They're for anyone changing or refitting an axle plate, and the one thing that matters is torque: just 3 Nm (27 in-lb) with a TX20 bit and a calibrated driver.

Yes, they're the axle-plate screws for the Rohloff SPEEDHUB 500/14. Older hubs with countersunk axle-plate screws were changed over to these M4 TX20 Torx screws in the current series.
Hubs from 2003 on have a quick-change axle ring held by five visible screws, with a sixth under the axle plate. The pack covers the full set.
Rohloff pairs this set with axle-plate changes, so the plate goes back on with fresh screws.
A TX20 Torx bit, tightened to 3 Nm (27 in-lb). That's a low value, so Rohloff asks for a correctly calibrated torque wrench.
Order it, ask us about fit, or book an install at the Brooklyn shop.