The Shimano E-Thru spacers that seat a Rohloff A12 reduction sleeve in a 12 mm Shimano thru-axle frame. They're replacements for A12 owners on Shimano E-Thru frames, and the one thing that matters is matching your hub's L/R-labeled hardware, including the special S sizes like the 3 mm black spacer.

On a Shimano E-Thru frame, the spacer slides over the reduction sleeve, and the pair goes into the dropout from the outside. Micro shims go between them if your measurement called for them.

Same order on the disc side: sleeve, shims if needed, then the spacer, then the M7 bolt with its Nord-lock washers threads into the A12 axle.
Rohloff only supplies A12 hardware after a qualified shop measures the dropouts. These are replacements for lost or damaged spacers; to fit an A12 hub to a new frame, the measurement comes first.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Only if your A12 Speedhub is in a Shimano E-Thru 12 mm frame. DT/Maxle and Syntace X12 frames use different A12 hardware.
8596 is the left-hand spacer and 8597 the right-hand. Your hub's A12 hardware came in bags labeled L and R, so replace like with like.
It's one of Rohloff's special-size spacers (3 mm, black anodized), chosen when a dropout measurement calls for it. Match the number on your existing hardware.
Not on their own. Rohloff requires a dropout measurement by a qualified shop before an A12 hub is fitted, and the hardware is chosen from that. Email us and we'll point you to the right next step.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.