PDW's Power Stance is a center-mount kickstand built around 40mm bolt spacing, in the small (S) length. Center-mount stands like this bolt to a plate behind the bottom bracket or to the chainstays, so the 40mm spacing and your bike's mount style are the two things to confirm before ordering.

Sized for frames with a 40mm bolt pattern at the center mount. Measure the bolt-hole spacing on your existing stand or mount plate before ordering.
This is the S length in the Power Stance lineup. Stand length sets how far the bike leans when parked, so pick the size that fits your wheel and tire setup.
Bolts behind the bottom bracket or to the chainstays rather than the rear axle, keeping the dropout area clear for racks and trailers.
It fits frames that use a 40mm center-mount bolt pattern. Check the bolt spacing on your current stand or mount plate, and confirm your frame mounts at the bottom bracket or chainstay. If you're unsure, send us your bike's spec and we'll confirm before you order.
S is the small length in PDW's Power Stance range. Length determines the lean angle when the bike is parked, so it should be matched to your wheel size and ride height.
It's a center mount, bolting near the bottom bracket or chainstays. If your frame only has a rear-axle mount, this isn't the right stand for it.
Order it, ask us about fit, or book an install at the Brooklyn shop.