Magura's Storm rotor drilled for the 4-bolt disc mount on a Rohloff Speedhub, in 160 or 180 mm. A standard 6-bolt rotor won't bolt to a Speedhub, so this is the rear rotor for a Rohloff bike; match the diameter to the rotor your bike has now so the caliper lines up.

A Rohloff Speedhub takes a 4-bolt rotor rather than the 6-bolt pattern most hubs use. This is Magura's Storm rotor made for that mount.

Use the size your bike already runs so the caliper and adapter line up. If you're not sure which one it came with, email us the bike and we'll help check.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
No. It is drilled for the Rohloff Speedhub 4-bolt disc mount. Other hubs take a 6-bolt or center-lock rotor.
The size printed on the rotor you are replacing, unless you are also changing the caliper adapter.
Rear. The Speedhub is a rear hub, so the front wheel takes a rotor that matches the front hub.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.