Magura's 2 mm Storm HC rotor on a standard 6-bolt mount, in 160, 180 or 203 mm. Magura lists it for enduro and downhill riding as well as e-allroad, e-city and cargo bikes, so read the size off the rotor on your bike and match it, since going bigger also takes the right caliper adapter.

At 2 mm, the Storm HC is the heavier-duty rotor in Magura's steel range, and Magura lists e-allroad, e-city and cargo bikes alongside enduro and downhill, the bikes that brake hard with weight on board.

Read the diameter printed on your current rotor and match it. A bigger rotor than the bike came with also needs a caliper adapter for that size. The HC is 6-bolt only, so a center-lock hub needs a different rotor.
Magura gives a 1.8 mm wear limit on a 2 mm rotor. Measure it with calipers when you change pads, and replace the rotor once it is at or under the limit.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
The one printed on your current rotor, unless you are also fitting a caliper adapter for a new size.
Six-bolt, with six steel screws in the box. A center-lock hub needs a center-lock rotor.
It works with all Magura pad compounds. Fresh pads on a fresh rotor need bedding in before they reach full power.
When it measures 1.8 mm or less, the wear limit Magura gives, or if it is bent or contaminated.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.