A 160 mm Magura Storm CL Center Lock disc brake rotor with the lockring included for thru-axle hubs. This is the replacement rotor for Magura-equipped bikes, sized at 160 mm and using the Center Lock interface, so it splines onto the hub and locks down with a threaded ring rather than bolting on with six small Torx screws.

The Storm CL is built to run with Magura's MT caliper family, so the steel braking track and the pad compound are designed to work together. Pads bed in evenly and the lever stays firm, which is the whole reason to keep a brake all one brand instead of mixing a generic rotor into the system.

If your hub takes a splined Center Lock rotor, this drops on with the included lockring and a cassette tool. It's the rotor to grab when you're replacing one that's worn past its wear line or warped from heat, or building a city or cargo e-bike up to a complete Magura setup.

The alloy carrier keeps weight down and helps shed heat, and the rotor is laser-etched with a 1.8 mm wear-line so you can check it at a glance. It runs Magura mineral-oil brakes, not DOT fluid.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Only if your hub is Center Lock, the splined interface that a lockring threads onto. Many modern e-bike hubs use it. If your hub instead has six bolts in a circle, you need the 6-bolt Storm rotor, not this one. Not sure which you have? Email us and we'll check before it ships.
Yes. A Center Lock lockring is in the box, so you have what you need to mount it on a thru-axle or quick-release hub. Installation takes a cassette/lockring tool.
It's designed for the Magura MT brake family. Magura brakes use mineral oil, not DOT fluid, so keep your bleed and service to Magura-spec parts. We service Magura brakes in Brooklyn if you'd rather have us do the swap.
Email us to order. Tell us your hub type (Center Lock vs 6-bolt) and rotor size and we'll confirm the right part before it ships.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.