An aluminum replacement lever blade for the Magura MT5 hydraulic disc brake. This is the lever you pull, sold as a spare so you can refresh a worn or bent blade without replacing the whole brake. Magura uses model-specific lever parts, so confirm your brake is an MT5 before ordering; if you are unsure, send us a photo of the lever and we will check it.

Fits the Magura MT5 hydraulic disc brake lever. Magura lever parts are model-specific, so this is the right blade only if your brake is an MT5.
Aluminum (alloy) construction, the same material the MT5 ships with from the factory.
Replacing a damaged or worn blade is cheaper than a new brake and keeps the rest of your hydraulic system untouched. No bleed required to swap the blade itself.
It fits the Magura MT5. It will not fit MT4, MT7, MT Trail, or MT Cargo brakes, which use their own lever parts. If you are not certain which Magura brake you have, send us a photo of the lever and master cylinder and we will confirm.
The aluminum lever blade only. Pivot hardware, the master cylinder, and reach-adjust parts are not included unless your specific listing states otherwise. Reuse your existing pivot pin and hardware, or contact us if anything is missing or damaged.
Swapping the lever blade does not open the hydraulic system, so a bleed is not required for the blade itself. If your brake also feels spongy, that is a separate issue and may call for a bleed with Magura mineral oil. Reach out and we can walk you through it.
Order it, ask us about fit, or book an install at the Brooklyn shop.