A single-side replacement Magura MT4 eSTOP disc brake, sold as a complete unit (caliper, lever, and hydraulic line) for front or rear, post mount, in black. The "eSTOP" lever carries Magura's integrated motor cutoff switch, so it's spec'd as OEM on plenty of e-bikes that need the brake to interrupt pedal assist when you grab the lever.

The lever includes Magura's eSTOP switch, which signals the motor to cut assist the instant you brake. If your e-bike was built around an eSTOP lever, a standard MT4 lever won't replace this function.
You get the caliper, lever, and pre-filled hydraulic line as a single unit, configurable for front or rear. Order one for the wheel you're replacing, or two for a full set.
This is a hydraulic, post-mount brake that runs Magura mineral oil (not DOT fluid). Pads and bleed kit are Magura-specific, so keep service parts in the same family.
It fits e-bikes spec'd with the Magura MT4 eSTOP brake and a post-mount caliper. Because the eSTOP lever ties into the motor cutoff, it's not a universal swap. Send us your bike's make, model, and year and we'll confirm before you order.
One complete brake unit for a single wheel: caliper, lever with the eSTOP switch, and the connecting hydraulic line, set up for either front or rear. Rotor and brake pads are not included unless noted.
Not if your bike relies on the eSTOP motor cutoff. A standard MT4 lever lacks the switch, so the assist wouldn't cut when you brake. Stick with the eSTOP unit to keep that safety function intact.
Order it, ask us about fit, or book an install at the Brooklyn shop.