A Magura MDR-P rotor with a 7.1 in (180 mm) diameter and 6-hole mount. Match the hub mount, rotor diameter, caliper clearance, and any required adapter before installation; send us your current brake setup if you want us to confirm the combination.

Magura specifies a 7.1 in (180 mm) diameter, 6-hole mounting pattern, and 0.079 in (2 mm) new thickness for this MDR-P configuration.
Hub mount is only one part of fitment. The frame or fork, caliper, and adapter must also support a 7.1 in (180 mm) rotor.
The two-piece MDR-P is Magura’s high-force, heat-resistant rotor for prolonged braking and higher system weights.
Your hub needs a 6-hole rotor mount, and the frame, fork, caliper, and adapter must be approved for a 7.1 in (180 mm) rotor. Center-lock hubs and bikes configured for a different rotor diameter need different parts. Send us a photo of the current rotor and caliper if you want us to confirm the setup.
It is 7.1 in (180 mm) in diameter, 0.079 in (2 mm) thick when new, and uses a 6-hole mount. Magura lists a 0.071 in (1.8 mm) wear limit.
Inspect the pads for wear, glazing, and contamination before fitting the rotor. Pad shape is tied to the exact caliper, so share the caliper model if you need help matching replacements.
Order it, ask us about fit, or book an install at the Brooklyn shop.