This is the Magura MT4 master (the lever-side assembly) in black, with a 2-finger aluminum lightweight lever blade, for MY2015-and-later MT4 brakes. It's the brake-lever half, not a caliper, rotor, or complete brake set, so it's the right part if you're replacing a damaged or worn MT4 lever rather than the whole system. Magura runs mineral oil, and pad and rotor compatibility on your bike are unchanged by a lever swap.

The MT4 master cylinder and lever blade assembly, the part you grip and the reservoir behind it. Pairs with your existing MT4 caliper, hose, rotor, and pads.
Specific to the MY2015-and-later MT4 platform. If your bike has an earlier MT4 or a different Magura line (MT5, MT7, MT Cargo), this lever may not match, so confirm your model year and brake line first.
Magura systems use mineral oil, not DOT fluid. Plan on a fresh bleed with a Magura bleed kit after fitting a new master so the lever feel is right.
Just the lever side, the MT4 master cylinder with the 2-finger aluminum blade. It is not a caliper, rotor, hose, or full brake set. Use it to replace a damaged or worn MT4 lever.
It is made for the MY2015-and-later MT4 platform. It is not a universal Magura lever, so it may not match an MT5, MT7, MT Cargo, or a pre-2015 MT4. Send us your bike or the marking on your current lever and we will confirm before you order.
Yes. Reconnect the hose and bleed the system with Magura mineral oil and a Magura bleed kit so the lever feels firm. We can handle the install and bleed in the shop if you would rather not do it yourself.
Order it, ask us about fit, or book an install at the Brooklyn shop.