This is Magura's replacement 1-finger HC aluminum lever blade for the Master MT lever, in black, for model-year 2017 and newer. It's the blade you pull, not the whole brake or lever assembly, so it's a targeted fix for a bent, scratched, or worn blade rather than a brake upgrade. It's the spec used on MT Trail Sport brakes, so confirm your lever is a Master MT from MY2017 on before ordering.
Available in-store and by order. Ask us and we’ll have it ready.

The HC (High Control) 1-finger aluminum blade in black, sized for the Magura Master MT lever from MY2017 forward. Swapping the blade is far cheaper than replacing the full lever after a crash or scuff.
Master MT is the lever used on Magura's MT Trail Sport brakes. If your bike runs that brake and the lever body is intact, this brings the contact surface back to factory.
Magura has run several lever generations. The blade has to match the Master MT lever and the MY2017-on revision. Send us your brake model and year if you're not sure and we'll verify the fit.
Just the blade, the aluminum piece your finger pulls. It bolts to your existing Master MT lever body. If the lever body, clamp, or hydraulics are damaged you'll need the full lever assembly instead, so send us a photo and we'll point you to the right part.
It fits the Magura Master MT lever from model year 2017 onward, the lever used on MT Trail Sport brakes. It won't fit MT4, MT5, MT7, or pre-2017 levers. Tell us your exact brake model and bike year and we'll confirm before you buy.
No. The blade is external to the hydraulic system, so a blade swap doesn't open the brake or require a bleed. If the lever feels soft or spongy after the swap, that's a separate issue worth having checked.
Order it, ask us about fit, or book an install at the Brooklyn shop.