A replacement 2-finger lever blade for Magura MT SPORT brakes (model year 2019 and newer), molded in Magura's Carbotecture composite and finished in black. This is the blade itself, the part your fingers pull, so it's the right fix for a snapped or worn lever after a tip-over or shipping ding. Because lever blades changed across MT generations, confirm your brake is MT SPORT from MY2019 on before ordering.

Designed for the Magura MT SPORT lever from model year 2019 forward. Earlier MT levers and other MT tiers (MT4, MT5, MT7) use different blades, so match the generation, not just the family name.
The longer 2-finger shape gives more mechanical advantage than a 1-finger blade. Carbotecture is Magura's reinforced composite, the same material used on the lever body.
If the blade is the only thing damaged, you replace the blade instead of the entire brake. Black finish matches the standard MT SPORT cosmetics.
It's made for the MT SPORT lever from MY2019 onward. If your brake is an MT SPORT from 2019 or later, it should be the correct blade. If you're not sure which MT model or year you have, send us a photo of the lever and the marking on the body and we'll confirm before you order.
No. This is just the blade, the part you pull with your fingers. The lever body, clamp, and master cylinder stay on the bike. If your lever body or internals are damaged, you'll need more than the blade, so let us know what happened and we'll point you to the right part.
Swapping the blade itself doesn't open the hydraulic system, so a bleed usually isn't needed. If your brake feels soft or the lever pulls to the bar, that's a separate hydraulic issue and we can walk you through next steps. Magura uses mineral oil, not DOT fluid.
Order it, ask us about fit, or book an install at the Brooklyn shop.