Replacement Magura Type 8.S disc brake pads in Magura's Sport (organic/resin) compound. These are the brand-specific pad shape for Magura's 2-piston calipers, so the one thing to nail down before ordering is which Magura caliper your bike runs.
Worn pads are the most common reason a Magura 4-piston brake feels vague or noisy. These are the Type 8 replacement pads for the 4-piston MT calipers, four individual pads per caliper, with the two retaining screws in the box so you're not hunting for hardware mid-job.
The 8.R race compound gives you the most outright bite and is the call if you want maximum stopping power up front. The 8.P performance compound trades a little of that for quieter, more consistent braking in wet and dry and longer pad life, which is the better everyday and long-ride choice.

Type 8 is the pad shape for Magura's 4-piston calipers: MT5, MT7, the 4-piston front of the MT Trail line, and the 4-piston Louise. It is not the shape for Magura's 2-piston calipers, so match the pad to the caliper you actually have.
Magura runs more than one 4-piston pad shape across model years (roughly 2015 to present for Type 8). If you're unsure whether your caliper takes Type 8 or Type 9, send us the brake model and we'll confirm before it ships.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Yes, if your caliper uses the four-individual-pad Type 8 shape, that covers MT5, MT7, and the 4-piston front of MT Trail brakes from roughly 2015 on. Confirm by checking that your caliper takes four small pads, not the two larger Type 9 pads used on some newer calipers.
Go 8.R (race compound) if you want the most bite and brake hard on descents and don't mind a bit more noise and faster wear. Go 8.P (performance compound) for daily riding and longer days, it lasts longer and stays quiet and consistent in mixed conditions.
The 8.R is listed as four single pads, which is a full set for one 4-piston caliper. If you're replacing pads at both wheels, you'll need two sets.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.