An 11-speed replacement chain built for ebike drivetrains, with EPT corrosion-resistant coating and 156 links. KMC's e-series chains are reinforced for the extra torque a mid-drive motor puts through the drivetrain, where a standard chain stretches faster, especially in higher assist modes.

A mid-drive motor stacks its pull on top of your pedaling, and that combined load is what stretches a standard chain early. The e11 uses hardened, riveted pins and KMC’s Double X-Bridge plate shape to carry that load, so it wears at a sane rate on a hard-pedaled e-bike.

A chain is the cheapest part of the drivetrain and the one that wears first. Replacing it on time, before it stretches past spec, is what keeps a worn chain from chewing up the far pricier cassette and chainring it runs against.

If your e-bike runs an 11-speed Shimano, SRAM, or Campagnolo drivetrain, this is the chain we fit when yours is worn. The 136-link length covers full-size and long-tail cargo frames; we size it to your bike at install.

Chamfered inner and outer plates help the chain climb the cassette cleanly even when the motor is loading the drivetrain, so shifts stay crisp instead of hesitating mid-cog on a hard pull.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It fits any 11-speed drivetrain, Shimano, SRAM, or Campagnolo, which covers the great majority of geared e-bikes. It is designed for mid-drive motors like Bosch. It will not work on 9, 10, or 12-speed setups; those need their own width chain. If you are not sure how many speeds your bike has, send us the model and we will confirm.
Yes. The e11 ships with a connecting (missing) link, so it installs without a special chain tool press-fit pin. You still size the chain to your frame and route it through the derailleur.
136 or 156 links depending on the variant; 156 is on the long side on purpose. That covers full-size bikes and longer long-tail cargo frames; on a shorter frame we simply remove the extra links when we size it.
More often than on a non-assist bike. The motor adds load, so the chain stretches faster. We check chain wear with a gauge at every service and replace it once it passes the wear limit. Staying ahead of it is the cheapest way to protect the cassette and chainring, which cost far more than a chain.
Yes, we service e-bike drivetrains in the shop and can fit and size the chain, check the cassette and chainring for wear at the same time, and tune the shifting. Email us to order or to book a service.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.