Jagwire's all-purpose replacement disc pad: a semi-metallic compound that's quiet like an organic pad but lasts like a metallic one. Brake pads are a wear item, not a forever part.

Semi-metallic blends the low noise and quick early bite of a resin pad with the heat tolerance and longevity of a metallic pad. That's why it's Jagwire's most popular disc pad and a safe default for most riders: quieter than full-sinter, longer-lasting than organic, and consistent across wet and dry.

Choose the Sport Semi-Metallic when you're replacing worn pads on a bike that sees normal commuting, errands, and around-town riding. It bites predictably from cold, stays quiet, and gives you a long service interval without the squeal that pure sintered pads can develop.

If you ride a heavy cargo bike, run long loaded descents, or have a fast speed-pedelec that's tough on brakes, Jagwire's Pro E-Bike pad is the better match in the same caliper shapes. It's built for the extra weight and sustained heat those bikes throw at a brake.
Each pack is one caliper's worth: a matched pad pair on steel backing plates, plus the retaining pin or spring clip the caliper uses. A typical two-rotor bike needs two packs, one per caliper.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Match it to your caliper, not just the brand. Jagwire makes the Sport Semi-Metallic compound in many backing-plate shapes for different brakes. The listings here cover common Shimano 4-piston calipers, Deore XT M8020, Saint M810/M820, Zee M640, XTR M965/M966/M975, SLX M665, plus TRP Quadiem and Slate and Tektro Orion 4-piston. Not sure which shape your bike uses? Send us the brake model or a photo of the caliper and we'll confirm.
It's a friction compound that blends resin (organic) and metallic materials. Organic pads are quiet and grab early but wear faster and fade under sustained heat; sintered metallic pads last and handle heat but can squeal and need more lever force when cold. Semi-metallic sits in the middle, which makes it the everyday choice for most commuter and around-town riding.
They'll fit and function on any e-bike that runs the calipers above. For normal commuting that's fine. But if you ride a heavy cargo bike, a fast speed-pedelec, or do long loaded descents, the brakes run hotter; Jagwire's Pro E-Bike pad uses the same shapes in a compound built for that heat and mass. We stock both; tell us how you ride and we'll point you to the right one.
Each pack is one pair, enough for one caliper. A normal bike with a front and rear brake needs two packs. Every pack includes the pad pair plus the spring clip or retaining pin the caliper uses. There's also a 25-pair bulk shop box for high-volume service.
Replace them when braking feels vague, gets noisy, or the friction material is worn thin near the backing plate (a common rule of thumb is under about 1 mm of pad left). Bed in new pads with a series of moderate stops before relying on them. We swap and bed pads in the Brooklyn shop; email us if you'd rather have it done.
We know the part numbers, the tools and what changed between generations. Tell us the bike and we will confirm the part before you order.
Book a service visit and we install the part while the bike is with us. No tools, no greasy fingers, no botched brake bleed.
Sometimes the part you came for is not the problem. If the cassette is fine and the chain is the real culprit, we say so before you buy.