A Jagwire Pro ebike disc brake pad sized for Shimano four-piston calipers, including XTR M9120, XT M8120, SLX M7120, Saint M820, and the MT520/MT420 trail brakes. It's an ebike-tuned compound, so it's built for the extra heat and weight that come with a motor and battery on board. If you run any of those Shimano four-piston brakes, this is a direct-fit replacement pad.

Made for Shimano four-piston calipers: XTR M9120, XT M8120, SLX M7120, Saint M820, and MT520/MT420. Match the pad to your caliper, not the bike, and it drops right in.
Jagwire's Pro ebike pads are tuned for the heat and load of a heavier, faster ebike, where stock pads can fade or wear quickly on long descents.
The compound is chosen for steady stopping power and modulation with minimal noise, so braking stays predictable as the pad heats up.
They fit Shimano four-piston calipers: XTR M9120, XT M8120, SLX M7120, Saint M820, and MT520/MT420. The pad is matched to the caliper, so check the model stamped on your caliper body rather than the bike. Not sure which brake you have? Send us a photo of the caliper and we'll confirm.
Brake pads are sold per the listing quantity shown at checkout. Each caliper needs one set (two pads). If you want enough to do both wheels, send us a note and we'll make sure you get the right count.
Yes. Jagwire's Pro ebike compound is tuned for the added speed and weight of an ebike, which puts more heat into the pads than a standard bike. They'll also work on a non-assist bike running the same Shimano calipers.
Order it, ask us about fit, or book an install at the Brooklyn shop.