A security axle nut for bolt-on wheels whose free-spinning outer ring leaves pliers and wrenches nothing to grip. Size it by axle thread (M9 for most fronts, M10 for most rears, 3/8 for Shimano Nexus and Alfine hubs), then lock it with a 6 mm Hexlox insert and key, sold separately.

A U-lock holds the frame, but a standard axle nut comes off with a 15 mm wrench. The Hexnut threads on in place of that nut, its outer ring spins freely so tools slip, and a Hexlox insert blocks the 6 mm socket.

Hexlox's rule of thumb is M9 for most front wheels and M10 for most rears, 3/8 for Shimano Nexus and Alfine hubs. Check the size on your old nut or axle before ordering; a few fronts (VanMoof, Miche, Dura-Ace) are M10.
The insert and key are sold separately and pair by a 3-digit code, so the same key can open every Hexlox insert on your bike that shares its code.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
Hexlox says most front wheels are M9 and most rear wheels M10. Shimano Nexus and Alfine hubs take the 3/8 size, and VanMoof, Miche and Dura-Ace fronts are M10. Check your current nut or axle to be sure.
No. The Hexnut replaces a threaded axle nut. Quick-release wheels take the Hexlox security skewer, and thru-axles take a Hexlox thru axle.
A 6 mm Hexlox insert for each Hexnut and a Hexlox key with the matching code, both sold separately.
Hexlox says 30 Nm is enough. Don't exceed the maximum your hub maker lists.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.