This is a replacement crank arm for Gazelle e-bikes running a Bosch drive system, built around a Miranda 001 crank with a Delta/ISIS spindle interface in black. It's a service part, not an upgrade, so the goal is matching it exactly to the crankset and bottom bracket already on your bike.
This is a replacement crank arm for Gazelle and other Bosch-powered e-bikes built around Miranda's Delta crankset. It's the part you want after a tip-over bends or stripes an arm, or after the spindle interface wears out.
You order a single arm, not a pair, so you only replace what's actually damaged. Pick the left (non-drive) or right (drive-side) arm to match the one you're swapping out.
Bosch mid-drives use two different ISIS spline shapes, and matching the wrong one is the main way this goes back as a return. Gen2 and Gen4 motors use standard ISIS.
Crank arms come in different lengths, and you want both sides equal. Measure your existing arm before you order so the replacement matches its partner. If you're not sure which Bosch generation or arm length you have, send us the motor details and we'll confirm it before you buy.
Specs come from the maker and can change. If one of these numbers matters to you, ask us and we’ll check the exact item.
Don’t see yours? Ask the team directly.
It fits Bosch mid-drive motors that use the Miranda Delta crankset with the ISIS splined spindle, common on many Active Line, Active Line Plus, and Performance Line units. The surest check is to look at your current arm: if it's a Miranda Delta with a splined (not square or pin) bore, this is the matching replacement. If you're unsure, send us a photo of your motor and old arm.
Just one. The left and right arms are separate parts, so pick the side you need. If both arms are worn or you want a matched pair, order the left and the right together.
Match whatever is on your bike now, Miranda Delta arms are typically 170mm or 175mm. The length is usually stamped on the inside of the arm; if you can't find it, measure from the center of the spindle bore to the center of the pedal hole.
Tell us the bike you ride; we’ll confirm the accessory works with your specific frame, motor, and mounting points before it ships.
What is on our shelves is ready to pick up or ship. If something needs to be ordered, we tell you up front, not after you pay.
Shop install, walk-in service, or a remote walkthrough, whatever it takes to get the accessory working on your bike.