The Benno Half Rail is a rear-rack add-on that fits the 46er, Carry On, and Boost EVO generations 1 through 3 (roughly model years 2016-2019). It bolts onto the existing rear rack to add a passenger rail along the side of the deck, giving a kid or a small adult something to hold and the rack a frame for pads and cargo. Because Benno changed its rack and mount layout from EVO 4 on, this version is the right one only for the older EVO 1-3 platform plus the 46er and Carry On.

Made for the 46er, Carry On, and Boost EVO 1, 2, and 3 (model years 16-19). Not the right part for Boost EVO 4 and later, which use a different rack and rail system.
The rail runs along the rack so a rear passenger has a handhold, and it gives you a frame to add rail pads and keep cargo from sliding off.
It's made for the 46er, Carry On, and Boost EVO 1-3 (about 2016-2019). It does not fit Boost EVO 4 or newer, which switched to a different rack and rail design. If you're not sure which generation you have, send us your model and model year and we'll confirm.
EVO 1 is the 2015 Boost, EVO 2 is 2018, and EVO 3 is 2019. EVO 3 added the rear rail bars. If you bought your Boost in 2020 or later it's likely EVO 4+, which this part does not fit. Email us your serial or model year and we'll check.
It adds a passenger rail along one length of the rear rack, so a rider on the back has a handhold and you have a frame for pads and cargo. It mounts to your existing rear rack, so confirm your rack and mount points before ordering.
Order it, ask us about fit, or book an install at the Brooklyn shop.