Skip to content
Fort Greene showroom · Mon–Sat 9–5 · Sun 10–3Mon–Sat 9–5Call or text 646-736-7716Free test rides

Hexlox suggest configurations

Propel's tested Hexlox setups by bike: which wheels, saddle, and bolts to lock down, which to skip for safety, and the exact bit sizes to order.

Here's how we'd set up Hexlox on each of these bikes, part by part, with the Hexlox bit size each one takes.

Tern GSD

Front wheel, not recommended, it already uses a cafe lock. V1 GSD uses Q-LOC; V2 uses Universal fit, threaded 15mm front. Pair with a 6mm Hexlox bit.

Rear wheel, not recommended. The rear end is very hard to access, and because the stock axle is much longer than normal, the Universal fit threaded 12mm rear tends to unthread during use, a real safety concern. It's also unnecessary, since the rear is already hard for a trained mechanic to reach, let alone a thief. Pair with a 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build. Pair with a 5mm Hexlox bit.

Seatpost clamp, needs a magnetic bolt, recessed nut, and curved washers, $7.50 per clamp, $15 total for 2 Tern GSD seatpost clamps converted for Hexlox. Pair with a 4mm Hexlox bit.


Riese & Müller Nevo

Front wheel. For Suntour fork, 15mm Universal Q-LOC front axle required. Pair with a 6mm Hexlox bit.

Rear wheel, 3 configs:

  • Rohloff: Hexlox REAR MTB skewer, 5mm Hexlox bit.
  • Vario: 1 or 2 Hexlox Hexnuts with M10 thread, 6mm Hexlox bit.
  • Touring: 12mm thru axle, either #LIG604 (presized and stronger, 12×1.5×172-174mm) or Universal fit 12mm rear threaded, 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


Riese & Müller Homage

Front wheel. For Suntour fork, 15mm Universal Q-LOC front axle required. Pair with a 6mm Hexlox bit.

Rear wheel, 3 configs:

  • Rohloff: Hexlox REAR MTB skewer, 5mm Hexlox bit.
  • Vario: 1 or 2 Hexlox Hexnuts with M10 thread, 6mm Hexlox bit.
  • Touring: 12mm thru axle, either #LIG604 (presized and stronger, 12×1.5×172-174mm) or Universal fit 12mm rear threaded, 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


Riese & Müller Supercharger

Front wheel. For Suntour fork, 15mm Universal Q-LOC front axle required. For Fox fork, a 15mm threaded or pre-sized 15mm Fox Robert thru axle required. Both front axles pair with a 6mm Hexlox bit.

Rear wheel, 3 configs:

  • Rohloff: Hexlox REAR MTB skewer, 5mm Hexlox bit.
  • Vario: 1 or 2 Hexlox Hexnuts with M10 thread, 6mm Hexlox bit.
  • Touring: 12mm thru axle, either #LIG604 (presized and stronger, 12×1.5×172-174mm) or Universal fit 12mm rear threaded, 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


Riese & Müller Superdelite

Front wheel. For Suntour fork, 15mm Universal Q-LOC front axle required. For Fox fork, a 15mm threaded or pre-sized 15mm Fox Robert thru axle required. Both front axles pair with a 6mm Hexlox bit.

Rear wheel, 3 configs:

  • Rohloff: Hexlox REAR MTB skewer, 5mm Hexlox bit.
  • Vario: 1 or 2 Hexlox Hexnuts with M10 thread, 6mm Hexlox bit.
  • Touring: 12mm thru axle, either #LIG604 (presized and stronger, 12×1.5×172-174mm) or Universal fit 12mm rear threaded, 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


Tern HSD

Front wheel, no cafe lock (unlike the GSD). Uses Universal fit, threaded 15mm front. Pair with a 6mm Hexlox bit.

Rear wheel, not recommended since it uses a cafe lock, but easy to install for extra security.

  • S8i uses 3/8″ hexnut, 6mm Hexlox bit.
  • S11 uses M10 hexnut, 6mm Hexlox bit.
  • P9 uses Hexlox REAR MTB skewer, 5mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build. Pair with a 5mm Hexlox bit.

Seatpost clamp, needs a magnetic bolt, recessed nut, and curved washers, $7.50 per clamp, $15 total for 2 seatpost clamps converted for Hexlox. Pair with a 4mm Hexlox bit.


Load 75 & Load 60

Front wheel, uses Universal fit, threaded 15mm front. Pair with a 6mm Hexlox bit.

Rear wheel, 3 configs:

  • Rohloff: Hexlox REAR MTB skewer, 5mm Hexlox bit.
  • Vario: 1 or 2 Hexlox Hexnuts with M10 thread, 6mm Hexlox bit.
  • Touring: 12mm thru axle, either #LIG604 (presized and stronger, 12×1.5×172-174mm) or Universal fit 12mm rear threaded, 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


Ultimate/Medeo T10/C380

Front wheel, uses Hexlox FRONT MTB skewer. Pair with a 5mm Hexlox bit.

Rear wheel, 2 configs:

  • T10 (derailleur): Hexlox REAR MTB skewer, 5mm Hexlox bit.
  • C380 (enviolo): 1 or 2 Hexlox Hexnuts with M10 thread, 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


Ultimate/Medeo T10+/C380+

Front wheel, uses Universal fit, front 15mm Suntour Q-LOC thru axle. Pair with a 6mm Hexlox bit.

Rear wheel, 2 configs:

  • T10 (derailleur): Hexlox REAR MTB skewer, 5mm Hexlox bit.
  • C380 (enviolo): 1 or 2 Hexlox Hexnuts with M10 thread, 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


Urban Arrow Family

Front wheel, uses Hexlox FRONT MTB skewer. Pair with a 5mm Hexlox bit.

Rear wheel, uses 1 or 2 Hexnuts with M10 thread. Pair with a 6mm Hexlox bit.

Saddle, sometimes needs a magnetic bolt, depending on the factory build.

Seatpost clamp, may need swapping for a bolted seatpost collar, with the bolt swapped for a magnetic bolt.


More in Security & locks

Still stuck, or is this about your own bike? The service team answers these all day.