Tern parts and accessories.
Atlas rack hardware, dual-stand parts, accessory adapters, and the small parts that wear on a daily-ridden Tern.
Bike racks

The Cargo Rack is the rear rack for Tern folding bikes.

The Hauler Rack is a front rack that bolts to the frame of a Tern with a Combo Mount and carries up to 20 kg (44 lb).

The Pack Rack is a front rack that mounts to the frame of a Tern with a Combo Mount and carries up to 15 kg (33 lb).

A rear rack with four suitcase spinner wheels, so a folded Tern rolls through a station instead of being carried.

A low-rider front fork rack that hangs a pair of panniers down beside your front wheel, keeping the weight low and the…
Bags, baskets & panniers

Tern's Bucketload is an open-top pannier big enough for a backpack or a full shopping bag, and it folds flat against…

Cargo Hold is Tern's family of rack-mounted, weatherproof rolltop panniers, sized to the bike and the job: the single…

A lockable, waterproof 26 L box that bolts to a Tern's Combo Mount on the head tube, no separate rack required.

A light, tough basket that hangs on the side of your rear rack like a pannier.

Tern's Market Basket is a rear rack basket with a steel frame and a woven look.

A short nylon strap with Fidlock magnetic buckles that bridges the rear rack and keeps Cargo Hold panniers secured in…

Tern's RidePocket is a compact handlepost bag for a phone, keys and wallet.

A 156 L all-weather compartment that turns the back of a Tern longtail into either a two-kid enclosure or a full cargo…

The Stow Bag is a padded carry bag for a folded Tern.
Child carriers

Tern's passenger rails for the back of a GSD, Quick Haul Long or Orox, with room for up to two kids.

The one-passenger version of Tern's Clubhouse rails.

The Clubhouse+ is Tern's full-size passenger rail set for the GSD Gen 2 (and Gen 1 with limitations): a railed…
Tools & care
Wheels & spokes
Tern accessories and parts

A pair of replacement front hub end caps for the Tern GSD Gen 2 longtail cargo bike.

A replacement black plastic end plug for the Tern Physis T-bar (the telescoping handlepost found on Tern folding and…

A hard-shell suitcase built for the Tern BYB.

The Andros is the Tern stem that lets you move the handlebars without tools.

A wide, two-legged steel kickstand for the first-generation GSD, rated to 176 lb (80 kg) including the bike.

The rubber bumper for the Atlas Lockstand, the kickstand on the Tern GSD Gen 2, with the bolt, nut and washer to mount…

The Atlas Lockstand is the dual-leg kickstand of the Tern GSD Gen 2, in black.

This is Tern's frame-matched rear rack, sold as a service/replacement part for their cargo and compact e-bikes.

A replacement ball head screw for the Tern Physis handlepost.

Two 3 m (9.8 ft) straps for tying cargo down on a Tern GSD.

The Bike Tow Kit lets a Tern GSD Gen 2 tow a second bike with nobody on it, a kid's bike or an adult's.

The Bossless Bottle Cage adds a bottle to a bike with no bottle mounts.

The Tern Bottle Cage has flexible arms that grip a bottle sideways, the way bottle mounts sit on many folding bikes.

The Tern Branding Board is a genuine Tern signboard that fits into the space between the top and down tubes on the…

A small replacement cable clamp that mounts to the Tern handlepost to keep your brake and shifter cables tidy and…

A lockable 5 L frame box that bolts in under the Quick Haul Long's battery, with a 3-digit combination lock built in.

The Captain's Chair is Tern's rear-deck passenger seat: a wide pad with side rails that give a bigger kid or an adult a…

The Cargo Lid is the waterproof cover that turns a Storm Box into a sealed cargo hold.

The Cargo Lid Lock is an extra-long cable with a combination lock that secures the Cargo Lid to a Tern Storm Box.

The waterproof cover for the Storm Box Mini, Tern's one-passenger weather compartment.

The Tern Cargo Tray is an L-shaped platform that bolts to the rear rack on the Tern HSD, Quick Haul, and Short Haul…

A slip-cover that bags a folded Tern in seconds and carries it by a shoulder strap, then packs into a pouch that rides…

A water-resistant storage compartment that fills the space at the back of the Tern Short Haul.

The Tern Clubhouse Backrest gives a bigger kid something to lean against on the rear rack, and it's built to pair with…

The Clubhouse MadPad is a soft padded insert for Tern's Clubhouse passenger rail, made to cushion and protect the…

The Clubhouse Mini is the single-seat passenger rail that turns a compact Tern into a one-kid hauler, with a 400 x 400…

A waterproof bottom cushion that clicks into any Tern Clubhouse, for one big kid who rides without a child seat.

The Tern Dog Roof Mini is the overhead roof piece of Tern's Doghouse Mini pet setup, giving your dog shade and weather…

A 100% waterproof rack-top bag that clicks onto any Tern or KLICKfix rear rack and lifts off just as fast when you want…

DuoStand Ends are the rubber-capped feet for a Tern DuoStand.

The DuoStand Gen 3 is Tern's two-leg center kickstand for the HSD, Quick Haul and Short Haul.

The DuoStand HSD Kit is the mounting hardware that some Tern HSD Gen 1 bikes need to fit a DuoStand kickstand.

The DuoStand S is the two-leg kickstand Tern makes for the NBD.

A single replacement end plug (the cap that finishes the open end of the frame stand tube) for Tern's Clubhouse…

A padded bag for carrying and storing a folded Tern.

The FlightSuit is a nine-piece padding kit for packing a 20 or 24 inch folding Tern into a standard suitcase.

This is the old-version freehub kit for the second-generation Tern GSD S10 (G2).

A replacement fender set sized for the first-generation Tern GSD longtail, so you keep road spray off yourself and…

Replacement OE fenders for the Tern GSD Gen 2, in black, with the mounting hardware included.

The chain guide pulley, with its bearing, for first-generation Tern GSD and HSD bikes.

A replacement chainguard for the first-generation Tern GSD S10, model years 2018-2019.

Replacement rider saddle for the Tern GSD longtail.

A direct replacement for the swept handlebar Tern specs on the GSD and HSD: 660 mm wide, 25.4 mm diameter, aluminum…

A 20-tooth, 3mm-offset reduction chainring for 2nd-generation Bosch motors.

A slim, water-resistant case that fits between the top tube and down tube of the Tern Quick Haul and Short Haul.

A slim office bag that clicks onto the Tern Luggage Truss.

Tern calls the Cache Box the glove compartment of the bike.

A black 20-inch fender set sized for the Tern HSD in P9, S8i, and S+ trims, made to keep road spray off you and the…

The replacement saddle (seat) spec'd on the Tern HSD, for riders restoring a worn or damaged seat or keeping a spare on…

A sturdy front basket that clicks onto the Tern Luggage Truss, so the load rides on the frame and the steering stays…

The Kanga Rack is a small front rack for a backpack, laptop bag or bag of groceries, rated to 14 lb (6.5 kg).

The kickstand shoe is the rubber foot on the bottom of a Tern double-leg kickstand, the part that actually touches the…

A replacement latch for the Atlas Lockstand on the GSD Gen 2, the mechanism that catches and holds the kickstand down…

Lockstand Extensions are feet that stick out sideways from the Tern Atlas Lockstand or the Duostand (Gen 2 or Gen 3).

The Lockstand QuadStruts give the kickstand of a Tern GSD Gen 2 a second pair of steel legs, so the bike stands on a…

The Tern Sidestrap is a side-mounted lashing strap that holds bags and odd-shaped cargo tight against the rack on Tern…

The Luggage Truss is Tern's frame-mounted front carrier: a KLICKfix quick-release mount (a common click-in standard for…

A small nylon chain guide that sits next to the chainring on a Tern folding bike and keeps the chain from dropping off.

A reflective rear mud flap that rivets onto the GSD or Quick Haul Long TowBar and flips up so the bike can still park…

Nitelite is Tern's line of USB-rechargeable safety lights made for the bar ends of its passenger accessories: the red…

The Trail Rack is a heavy-duty front rack built for Tern's Orox, the brand's 26" wheel adventure cargo bike.

The Physis 3D T-Bar Handlepost is Tern's folding steering column, forged from a single piece of aluminum and…

Pinhead wheel locks for the Tern GSD S10.

A Pinhead lock for the seat and seatpost on a Tern, dropper posts included.

A Pinhead locking set for both seatpost clamps on the GSD Gen 2, so the seatpost and saddle stay with the bike.

A saddle made for carrying the bike as well as riding it.

This is a single replacement pulley bracket for a Tern cargo rack, sold on its own.

A Tern OEM chain guide pulley wheel, the small roller that keeps your chain tracking and helps prevent drops.

The Rain Shield is a waterproof cover that snaps onto the Tern Sun Shield and turns it into a full rain canopy for kids…

A clear-paneled rain cover rated to 12,000 mm of waterproofing that snaps onto the Sun Shield Mini in seconds with…

The RidePouch is a small bag for the things you carry on every ride, such as a chain lock, a flat kit or a snack.

A replacement 20-inch, 36-hole double-wall rim, as fitted to the Tern HSD S+ with the enviolo hub.

A replacement 20-inch double-wall rim for the Tern HSD, drilled for 32 spokes in black.

A replacement rubber plug for the Tern Lockstand Extensions, in black.

A replacement chainguard (SKS Chainblade) sized for Tern's Bosch-powered models with a 46 to 48-tooth chainring.

The Shortbed Tray is a heavy-duty rear tray for the Tern GSD that carries up to 35 kg (77 lb) low to the ground.

A single replacement pole for the Sun Shield, the full-size sun canopy for the GSD and Quick Haul Long.

Extra-wide fold-away lower decks that install only on the GSD Gen 2 (per Tern's manual), built for serious hauling: 10…

A flat passenger handlebar that clamps to your seatpost, with a 4/5/6 mm Allen key tucked into the bar.

Retractable rear foot pegs for a passenger riding on a Tern GSD Gen 1 (the GSD built before 2020).

Aluminum footrests with an anti-slip top that bolt to the HSD so a rear passenger has somewhere to plant their feet.

Anti-slip aluminum footrests for a passenger on the back of a Tern HSD.

A grab handle that straps to the rear rack instead of the seatpost, so your passenger has something to hold even with…

Tern's U-shaped passenger bar that clamps to the seatpost and gives a rear-deck passenger a secure handhold.

The Sidekick Lower Deck adds a pair of low shelves to a Tern GSD Gen 1.

A lap belt with an airplane-style buckle for a kid who has outgrown the child seat but still rides on the back of your…

The Sidekick Seat Pad is a cushion for a passenger on the rack of a Tern GSD.

Sidekick Stirrups are soft foot supports for a big kid riding on the back of a Tern Quick Haul or Short Haul.

Tern's mesh covers that keep a passenger's feet, shoelaces, and clothing out of the spinning rear wheel, sized to the…

Fixed aluminum decks that bolt over the GSD Gen 2's frame-integrated lower decks and widen them to 4.7 in (12 cm) per…

The middle piece of Tern's Doghouse Mini, the purpose-built setup for carrying a trained dog up to 30 lb (13.5 kg)…

The wraparound soft compartment of Tern's Clubhouse Fort: it closes in the rear deck of a GSD Gen 2, GSD Gen 3, or…

The Storm Box Mini turns the back of a Tern HSD, Quick Haul or Short Haul into a weather-protected bucket for one…

A weatherproof tub that wraps the back of a GSD Gen 2, GSD Gen 3 or Quick Haul Long for two young kids or up to 160 L…

The Storm Shield is the canopy layer of Tern's Clubhouse Fort: an all-weather cover over the rear passenger area that…

Stow Decks are a pair of folding side decks that carry up to 35 kg (77 lb) per side.

The Sun Shield is a sun canopy for kids riding in a Tern Clubhouse.

A UPF 50 sun canopy for one child riding on a Clubhouse Mini, roomy enough for a child seat plus helmet.

The Tail Hitch L lets you pull a trailer behind a Tern GSD (Gen 2 or Gen 3) or Quick Haul Long while your panniers and…

A replacement telescopic seatpost for Tern bikes, in matte black with the Tern logo and sized for 30.9 mm posts with a…

Tern's 1 oz touch-up paint, matched to your bike's factory colorway, for hiding the chips and scratches that come with…

The Transporteur is a front rack that mounts to the frame of a Tern, so a load does not weigh on the steering.

The Valo is the Tern headlight that sits inside the handlebar stem, where it is out of the way of knocks and hard to…


A 26 l insulated cooler made to ride on a Tern rack.

A small plastic cap that closes off the open tube ends on Tern's integrated rear rack.
A replacement freehub kit (the cassette body) for the Atlas rear hub on the GSD S10 Gen 2.
The left crank arm from the first-generation GSD S10 and S00, Tern's own forged aluminum cargo crank.
The right crank arm from the first-generation GSD S10 and S00, Tern's own forged aluminum cargo crank.
The stock black fender set for the HSD Gen 2, as fitted to the P10, S11, P5i and S00.
The Tern Atlas rear hub from the GSD S10 Gen 2: Boost 148 mm, 12 mm thru-axle, 32 holes, 10-speed cassette.

