Skip to content
Fort Greene showroom · Mon–Sat 9–5 · Sun 10–3Mon–Sat 9–5Call or text 646-736-7716Free test rides
Bosch Motor

Bosch Performance Line CX

85 Nm and eMTB mode. Cargo and hills.

An 85 Nm motor (the same peak figure as Cargo Line, delivered with a sportier tune), designed for loaded cargo, steep hills, and harder duty. 20 mph (Class 1), eMTB mode that ramps assist with effort.

UL 2849 system certifiedLearn more
The details

Performance Line CX is what's under the bikes that need to actually work hard: full-cargo bikes, mountain-leaning e-bikes, anything that's going to climb meaningful hills under load. Hardtails, full-suspension trail bikes, and high-spec commuters spec it for the same reason, sustained 85 Nm output that holds up under real load.

The signature feature is the eMTB mode, where instead of fixed assist levels the motor ramps its output based on how hard you're pushing the pedals (140-340% support at up to the full 85 Nm). Climb harder, get more help. eMTB ships in place of Sport mode where the bike manufacturer enables it, and a calmer proportional Tour+ mode can replace Tour; both swaps are set by the bike manufacturer or a Bosch-trained dealer, not in the app.

Current units run 85 Nm with cadence support past 120 rpm; that rating dates to the 2021 model year (earlier versions were 75 Nm, and some 2020 drive units can be upgraded).

Where it differs from the Cargo Line: tuning. CX favors a punchier mid-RPM response (you feel it on accelerations), while Cargo Line favors steady low-RPM torque (you feel it under sustained load). Shared platform, different feel.

On Smart System Performance Line CX motors, Bosch has shipped ongoing firmware updates since 2024 that meaningfully increase low-cadence torque and refine the assist tuning. Same hardware, more usable power off the line and on steep low-speed climbs. Updates are free, come through the eBike Flow app, and apply to compatible motors automatically. Smart System builds also include eBike Lock: after setup in the Flow app your phone acts as a digital key over Bluetooth, and motor support stays disabled without it.

Heat management is the under-the-hood story. Performance Line CX sustains high-output cycles longer without thermal cutbacks, which is what makes it the right pick for the hard-duty bikes.

View in the component library
Key facts
Torque
85 Nm peak (2024 Smart System firmware added low-cadence torque)
Top assisted speed
20 mph (Class 1)
Weight
~6.4 lb (2.9 kg)
Special mode
eMTB (proportional assist)
Best for
  • Loaded cargo bikes
  • Mountain-leaning and gravel e-bikes
  • Family-cargo with regular hill duty

What this motor includes and what you can add.

Built-in features ship at no extra cost. Add-ons are optional purchases. Compatible frames means it’s spec’d at build time and isn’t retrofittable.

  • eMTB ride mode
    Built-in

    Proportional assist that ramps with how hard you pedal. Built into Performance Line CX, no extra hardware. Enabled via the eBike Flow app on Smart System.

  • Newer Performance Line CX motors ship with Smart System. Pair with Kiox 300 or LED Remote for the connected experience.

  • eBike ABS
    Compatible frames

    Anti-lock braking for e-bikes (Bosch ABS, with Magura or TRP brake hardware). It came factory-fitted on some Riese & Müller bikes with this motor and cannot be added aftermarket, our service team supports the bikes that already have it.