Questions? Want to test ride? 718.643.4542 or [email protected]

Questions? Want to test ride? 718.643.4542 or [email protected]

Proudly located in Brooklyn! Changing the way we move since 2011

Haibike SDURO HardFour 4.0 2018
Haibike_2017_SDURO_HardFour_40Haibike_2017_SDURO_HardFour_40

Haibike SDURO HardFour 4.0 2018

$2,599.00

The Haibike SDURO HardFour 4.0 2018 has Yamaha LED display is a compact and robust display / remote unit. Despite its small size, it provides the operator with all essential information. Easily accessible positioned to the left on the handlebars, all settings can be made to the system beyond.

Available

Category:
000

The Haibike SDURO HardFour 4.0 2018 is made of impact-resistant plastic, the lightweight device provides effective protection against scratches or damage to the engines.

Frame: The Haibike SDURO HardFour 4.0 2018 features a lightweight 6061 aluminum frame with tapered headtube and cables are internally routed for a clean finish.

Brakes: The Haibike SDURO HardFour 4.0 2018 is equipped with high-quality Tektro HD-M286 hydraulic disc brakes with 160mm front and rear rotors. In addition to providing reliable stopping power, these brakes are low-maintenance and easy-to-control.

Drivetrain: The Haibike SDURO HardFour 4.0 2018 features Yamaha PW-System, 500W, a Shimano Shimano Acera M3000, 9-speed rear derailleur and Shimano Altus M370, rapid-fire shifter located on the grip.

Top Speed: Like most electric bikes sold in the US, the Haibike SDURO HardFour 4.0 2018 has a top speed of 20 mph in keeping with federal law. There are ways to remove this speed limit for use on private roadways, however, the jury is still out on how this will impact your Warranty. Until we get an official word from Haibike, we’re going to err on the side of caution. Please contact us to learn about the concerns with making this modification.

Accessories: Our team has a lot of experience outfitting bikes with additional accessories, so be sure to reach out to us if there’s anything you may need.

Motor: The proven Yamaha PW engine is a powerful and highly reliable engine. Thanks to its Zero-Cadence support and helps the driver right from the first revolution of the crank. One of the few means engines it also allows a dual chainring, which offers a greater range of gear ratios and thus an even better uphill and downhill performance. Given him make its high maximum torque of up to 80Nm, its compact size and the low noise one of the best drives for sportive eBike.

Display: The proven Yamaha multifunction display provides a quick overview of all the information of the Yamaha system. The removable display can be operated simply by the attached links on the handlebar remote from the handle. The special holder it can be mounted in different positions.

Information available includes the selection and display of the support levels (Off, Eco +, Eco, Standard, High) and the display of the battery charging level, remaining range, driving, average and maximum speed, daily and total kilometers, time and the current support level. About the Remote light can be switched on and off as well as a pushing aid to 6km / h are activated.

Skidplate: Especially with eMTBs include bouncing or rockfalls, which can seriously damage the deep-seated motor, an everyday occurrence. The Skidplate is useful as a protective device not only from a technical perspective, it also encompasses optical engine.So this is visually part of the frame. The result is a technically perfect tailed motor which, as its standard solution, a non-autogenous part is not, but is a self-evident center of ePerformance bikes.

Additional information

Frame

aluminium 6061, Gravity Casting Interface, Hydroformed, Tapered head tube, quick-release 5 x 135mm, disc brake Post Mount

Motor

Yamaha PW-System, 500W

Display

Yamaha LED

Battery

Charger

Yamaha quick charger 4A

Fork

Rear Derailleur

Shimano Acera M3000, 9-speed

Gear Lever

Shimano Altus M370, rapidfire

Rear Sprocket

REAR SPROCKET Sram PG920, 11-34 teeth

Chain

FSA, 32, steel

Front Brake

Tektro HD-M286, 160mm, hydraulic disc brakes

Rear Brake

Tektro HD-M286, 160mm, hydraulic disc brakes

Tire

Schwalbe Table Top Performance, 57-507

Rims

Alexrims MD21, aluminium

Front Hub

XLC aluminium disc, quick release axle

Rear Hub

XLC aluminium disc, quick release

Spoke

black 2,0mm/2,0mm/2,0mm, black

handlebars

Haibike Components TheBar + Topflat 640mm

Grips

XLC lock on grips Sport

Stem

Haibike Components TheStem +, A-head, Bar bore: 31.8mm, 12˚

Saddle

Selle Royal Hello

Seatpost

Haibike Components The seat post ++, patent, 31.6mm, aluminium

Pedals

Wellgo LU984DU

Weight

41.66lbs

Wheel Size

As the new 2018 electric bikes roll in, it is our job to ensure that our customers have the very first opportunity available to pre-order their electric bike. Pre-ordering with Propel is made simple. In order to be among the first to get your hands on your 2018 electric bike, a small deposit of $250 is required. For the most up-to-date availability information or to pre-order, please contact [email protected] or give us a call at 718-643-4542.

Below sizes are recommended as a good starting point when thinking about sizing. Please contact us for recommendations based on your specific needs.


Frame size
Uni
A
FRAME HEIGHT
34 cm
B
SEAT TUBE ANGLE
73 °
C
SEAT TUBE OFFSET
D
SEAT ANGLE
73 °
E
HEAD TUBE LENGTH
175 mm
F
HEAD TUBE ANGLE
68 °
G
TOP TUBE LENGTH (HORIZONTAL)
500 mm
H
CHAINSTAY LENGTH
415 mm
I
BB DROP
-30 mm
J
WHEEL BASE
1000 mm
K
STACK
565 mm
L
REACH
327 mm
M
STAND-OVER HEIGHT
68 cm

 

Reviews(0)

There are no reviews yet.

Add a Review

Be the first to review “Haibike SDURO HardFour 4.0 2018”