Questions? Want to test ride? 718.643.4542 or [email protected]

Haibike SDURO Full FatSix 7.0 2017
  • sduro_full_fatsix_7-0

Haibike SDURO Full FatSix 7.0 2017


The Haibike SDURO Full FatSix 7.0 2017 is perfectly suited for rough and loose terrain. It features Yamaha drive and a full suspension frame. A perfect combination of traction, comfort and stability.

Size S M L
Clear selection
Clear selection

The Haibike SDURO Full FatSix 7.0 2017 with the Yamaha drive are perfect for rough and loose terrain. The Haibike SDURO Full FatSix 7.0 2017 is a very special highlight – a full suspension e-fatbike that provides the perfect combination of traction, comfort, and stability.

Frame: The Haibike SDURO Full FatSix 7.0 2017 features a lightweight hydroformed 6061 aircraft grade aluminum frame. It has a high strength to weight ratio and is highly resistant to corrosion. The frame also features a cable inlet system giving the bike an elegant solution for routing the wires and cables. Some other notable frame features include a gravity cast junction giving superior strength to the central load area and the Haibike’s high clearance centrally mounted motor is protected with their unique skidguard design.

Brakes: The Haibike SDURO Full FatSix 7.0 2017 is equipped with high-quality Shimano Deore XT M8000 aluminum brakes. In addition to providing reliable stopping power, these brakes are low-maintenance and easy-to-control.

Drivetrain: The Haibike SDURO Full FatSix 7.0 2017 features Shimano Deore XT Shadow M8000 Plus, 11-speed derailleur paired with a Shimano Deore XT M8000 Rapidfire shifter located on the grip.

Top Speed: Like most electric bikes sold in the US, the Haibike SDURO Full FatSix 7.0 2017 has a top speed of 20 mph in keeping with federal law. There are ways to remove this speed limit for use on private roadways, however the jury is still out on how this will impact your Warranty. Until we get an official word from Haibike, we’re going to err on the side of caution. Please contact us to learn about the concerns with making this modification.

Sizing Options: It comes in a variety of sizes; Small (42cm), Medium (46cm), and Large (50cm). If you’re unsure of what size would be best for you, please contact us so that we can assist you in finding your correct fit.

Tires: The power meets the ground with it’s Schwalbe Jumbo Jim Evo 100-559 tires.

Accessories: Our team has a lot of experience outfitting bikes with additional accessories, so be sure to reach out to us if there’s anything you may need.

Motor: The proven Yamaha PW engine is a powerful and highly reliable engine. Thanks to its Zero-Cadence support and helps the driver right from the first revolution of the crank. One of the few means engines it also allows a dual chainring, which offers a greater range of gear ratios and thus an even better uphill and downhill performance. Given him make its high maximum torque of up to 80Nm, its compact size and the low noise one of the best drives for sportive eBike.

Display: The proven Yamaha multifunction display provides a quick overview of all the information of the Yamaha system. The removable display can be operated simply by the attached links on the handlebar remote from the handle. The special holder it can be mounted in different positions.

Information available include the selection and display of the support levels (Off, Eco +, Eco, Standard, High) and the display of the battery charging level, remaining range, driving, average and maximum speed, daily and total kilometers, time and the current support level. About the Remote light can be switched on and off as well as a pushing aid to 6km / h are activated.

Skidplate: Especially with eMTBs include bouncing or rockfalls, which can seriously damage the deep-seated motor, an everyday occurrence. The Skidplate is useful as a protective device not only from a technical perspective, it also encompasses optical engine.So this is visually part of the frame. The result is a technically perfect tailed motor which, as its standard solution, a non-autogenous part is not, but is a self-evident center of ePerformance bikes.

Additional Information


6061 Aluminum, Gravity Casting Interface, hydroformed, thru axle M12 (1.50) x 197mm, disc brake Postmount, Travel: 120mm


Yamaha PW-System – USA, 500W


Yamaha LCD


Yamaha lithium ion, 500 Wh


Yamaha Rapid Charger 4A

Front Suspension

RockShox Bluto, air Travel: 120mm, aluminum shaft 1 1/8 “- 1 1/2” tapered, half shaft

Rear Suspension

RockShox Monarch RT3, air

Rear Derailleur

Deore XT Shadow M8000 Plus, 11-speed, Shimano


Shimano Deore XT M8000, RapidFire


Shimano Deore XT M8000, 11-46 teeth


Shimano HG601


FSA Alu, 38


direct mount nylon

Front and Rear Brakes

Shimano Deore XT M8000, aluminum


Schwalbe Jumbo Jim Evo, 100-559


Alexrims Blizzerk Pro, aluminum


XLC Evo Disc, floating axle 15×150 Fatbike


XLC Evo Disc, floating axle 12×197, Fatbike


DT Swiss Industry, black


Haibike Components TheBar ++


XLC screw handles Sport


Haibike Components TheStem ++, A-Head, bar bore: 31.8mm, 6˚


TA-Head Alloy Tapered


Selle Royal Voga


Haibike Components TheSeatpost ++, patent, 31.6mm


XLC freeride platform pedal


53.4 lbs.


26 “

As the new 2017 electric bikes roll in, it is our job to ensure that our customers have the very first opportunity available to pre-order their electric bike. Pre-ordering with Propel is made simple. In order to be among the first to get your hands on your 2017 electric bike, a small deposit of $250 is required. For the most up-to-date availability information or to pre-order, please contact [email protected] or give us a call at 718-643-4542.

This electric bike is expected to be available for shipment as early as January of 2017.

Below sizes are recommended as a good starting point when thinking about sizing. Please contact us for recommendations based on your specific needs.


Frame size S M L
A FRAME HEIGHT 42 cm 46 cm 50 cm
B SEAT TUBE ANGLE 73 ° 73 ° 73 °
D SEAT ANGLE 73 ° 73 ° 73 °
E HEAD TUBE LENGTH 130 mm 140 mm 150 mm
F HEAD TUBE ANGLE 68 ° 68 ° 68 °
G TOP TUBE LENGTH (HORIZONTAL) 570 mm 600 mm 630 mm
H CHAINSTAY LENGTH 485 mm 485 mm 485 mm
I BB DROP -20 mm -20 mm -20 mm
J WHEEL BASE 1162 mm 1193 mm 1224 mm
K STACK 617 mm 626 mm 635 mm
L REACH 382 mm 409 mm 436 mm


There are no reviews yet.

Add a Review

Be the first to review “Haibike SDURO Full FatSix 7.0 2017”