Haibike SDURO FatSix 6.0 2017
The Haibike SDURO Full FatSix 7.0 2017 is perfectly suited for rough and loose terrain. It features Yamaha mid-drive system. A perfect combination of traction, comfort and stability.
The Haibike SDURO FatSix 6.0 2017 with the Yamaha mid-drive system are perfect for rough and loose terrain.
The birth of the SDURO class opened up the world of ePerformance to a wider range of riders by offering them a quality model line at even more affordable prices. Powered by the reliable and extremely successful Yamaha eBike system, SDURO offers enormous riding pleasure at a great value.
Frame: The Haibike SDURO FatSix 6.0 2017 features a lightweight hydroformed 6061 aircraft grade aluminum frame. It has a high strength to weight ratio and is highly resistant to corrosion. The frame also features a cable inlet system giving the bike an elegant solution for routing the wires and cables. Some other notable frame features include a gravity cast junction giving superior strength to the central load area and the Haibike’s high clearance centrally mounted motor is protected with their unique skidguard design.
Brakes: The Haibike SDURO FatSix 6.0 2017 is equipped with high-quality Magura MT4 aluminum brakes. In addition to providing reliable stopping power, these brakes are low-maintenance and easy-to-control.
Drivetrain: The Haibike SDURO FatSix 6.0 2017 features SRAM NX 11-speed derailleur paired with a SRAM NX trigger switch shifter located on the grip.
Top Speed: Like most electric bikes sold in the US, the The Haibike SDURO FatSix 6.0 2017 has a top speed of 20 mph in keeping with federal law. There are ways to remove this speed limit for use on private roadways, however the jury is still out on how this will impact your Warranty. Until we get an official word from Haibike, we’re going to err on the side of caution. Please contact us to learn about the concerns with making this modification.
Sizing Options: It comes in a variety of sizes; Small (40cm), Medium (45cm), and Large (50cm). If you’re unsure of what size would be best for you, please contact us so that we can assist you in finding your correct fit.
Tires: The power meets the ground with it’s Schwalbe Jumbo Jim Evo 100-559 tires.
Accessories: Our team has a lot of experience outfitting bikes with additional accessories, so be sure to reach out to us if there’s anything you may need.
Motor: The proven Yamaha PW engine is a powerful and highly reliable engine. Thanks to its Zero-Cadence support and helps the driver right from the first revolution of the crank. One of the few means engines it also allows a dual chainring, which offers a greater range of gear ratios and thus an even better uphill and downhill performance. Given him make its high maximum torque of up to 80Nm, its compact size and the low noise one of the best drives for sportive eBike.
Display: The proven Yamaha multifunction display provides a quick overview of all the information of the Yamaha system. The removable display can be operated simply by the attached links on the handlebar remote from the handle. The special holder it can be mounted in different positions.
Information available include the selection and display of the support levels (Off, Eco +, Eco, Standard, High) and the display of the battery charging level, remaining range, driving, average and maximum speed, daily and total kilometers, time and the current support level. About the Remote light can be switched on and off as well as a pushing aid to 6km / h are activated.
Skidplate: Especially with eMTBs include bouncing or rockfalls, which can seriously damage the deep-seated motor, an everyday occurrence. The Skidplate is useful as a protective device not only from a technical perspective, it also encompasses optical engine.So this is visually part of the frame. The result is a technically perfect tailed motor which, as its standard solution, a non-autogenous part is not, but is a self-evident center of ePerformance bikes.
6061 Aluminum, Gravity Casting Interface, hydroformed, thru axle M12 (1.50) x 197mm, disc brake Postmount
Yamaha PW-System – USA, 500W
Yamaha lithium ion, 400 Wh
Yamaha Rapid Charger 4A
RST Renegade Air TRL Fatbike lockout, air Travel: 100mm, aluminum shaft 1 1/8 “- 1 1/2” tapered, half shaf
NX, 11-speed, SRAM
Sram NX, trigger switch
Sram PG1130, 11-42 teeth
FSA Alu, 38
direct mount nylon
|Front and Rear Brakes||
Magura MT4 , aluminum
Schwalbe Jumbo Jim Evo, 100-559
Alexrims Blizzerk80, aluminum
XLC Evo Disc, floating axle 15×150 Fatbike
XLC Evo Disc, floating axle 12×197, Fatbike
DT Swiss Industry, black
Haibike Components TheBar ++
XLC screw handles Sport
Haibike Components TheStem ++, A-Head, bar bore: 31.8mm, 12˚
A-Head Alloy Tapered
Selle Royal Voga
Haibike Components TheSeatpost ++, patent, 31.6mm
XLC freeride platform pedal
As the new 2017 electric bikes roll in, it is our job to ensure that our customers have the very first opportunity available to pre-order their electric bike. Pre-ordering with Propel is made simple. In order to be among the first to get your hands on your 2017 electric bike, a small deposit of $250 is required. For the most up-to-date availability information or to pre-order, please contact [email protected] or give us a call at 718-643-4542.
This electric bike is expected to be available for shipment as early as January of 2017.
Below sizes are recommended as a good starting point when thinking about sizing. Please contact us for recommendations based on your specific needs.
|A||FRAME HEIGHT||40 cm||45 cm||50 cm|
|B||SEAT TUBE ANGLE||73 °||73 °||73 °|
|C||SEAT TUBE OFFSET||–||–||–|
|D||SEAT ANGLE||73 °||73 °||73 °|
|E||HEAD TUBE LENGTH||120 mm||130 mm||140 mm|
|F||HEAD TUBE ANGLE||69 °||69 °||69 °|
|G||TOP TUBE LENGTH (HORIZONTAL)||570 mm||600 mm||630 mm|
|H||CHAINSTAY LENGTH||475 mm||475 mm||475 mm|
|I||BB DROP||-50 mm||-50 mm||-50 mm|
|J||WHEEL BASE||1127 mm||1157 mm||1188 mm|
|K||STACK||624 mm||633 mm||642 mm|
|L||REACH||379 mm||406 mm||434 mm|