Haibike SDURO AllMtn 6.5 2017
The Haibike SDURO HardSeven 6.0 2017 is a full suspension ebike. It features 6061 Aluminum Alloy frame and equipped with the proven Yamaha PW mid-drive system, an attractive price to performance ratio.
The Haibike SDURO AllMtn 6.5 2017 is equipped with the powerful and reliable Yamaha PW mid-drive system which feels pure and natural while riding. It has a robust 6061 aluminum full suspension frame, 150 mm of travel and a well-balanced tour geometry, making this bike a great all-rounders.
Frame: The Haibike SDURO AllMtn 6.5 2017 features a lightweight hydroformed 6061 aircraft grade aluminum frame. It has a high strength to weight ratio and is highly resistant to corrosion. The frame also features a cable inlet system giving the bike an elegant solution for routing the wires and cables. Some other notable frame features include a gravity cast junction giving superior strength to the central load area and the Haibike’s high clearance centrally mounted motor is protected with their unique skidguard design.
Brakes: The Haibike SDURO AllMtn 6.5 2017 is equipped with high-quality Magura MT5 aluminum brakes. In addition to providing reliable stopping power, these brakes are low-maintenance and easy-to-control.
Drivetrain: The Haibike SDURO AllMtn 6.5 2017 features Shimano Deore XT M786 Shadow Plus 20-speed derailleur, Dual Chainring and Shimano Deore XT M780 Rapidfire shifter located on the grip.
Top Speed: Like most electric bikes sold in the US, the Haibike SDURO AllMtn 6.5 2017 has a top speed of 20 mph in keeping with federal law. There are ways to remove this speed limit for use on private roadways, however the jury is still out on how this will impact your Warranty. Until we get an official word from Haibike, we’re going to err on the side of caution. Please contact us to learn about the concerns with making this modification.
Sizing Options: It comes in a variety of sizes; Small (40cm), Medium (44cm), Large (48cm) and Extra Large (52cm). If you’re unsure of what size would be best for you, please contact us so that we can assist you in finding your correct fit.
Tires: The power meets the ground with it’s Schwalbe Nobby Nic Evo SnakeSkin 70-584 tires.
Accessories: Our team has a lot of experience outfitting bikes with additional accessories, so be sure to reach out to us if there’s anything you may need.
Motor: The proven Yamaha PW engine is a powerful and highly reliable engine. Thanks to its Zero-Cadence support and helps the driver right from the first revolution of the crank. One of the few means engines it also allows a dual chainring, which offers a greater range of gear ratios and thus an even better uphill and downhill performance. Given him make its high maximum torque of up to 80Nm, its compact size and the low noise one of the best drives for sportive eBike.
Display: The proven Yamaha multifunction display provides a quick overview of all the information of the Yamaha system. The removable display can be operated simply by the attached links on the handlebar remote from the handle. The special holder it can be mounted in different positions.
Information available include the selection and display of the support levels (Off, Eco +, Eco, Standard, High) and the display of the battery charging level, remaining range, driving, average and maximum speed, daily and total kilometers, time and the current support level. About the Remote light can be switched on and off as well as a pushing aid to 6km / h are activated.
Dual Chainring: The driver benefits greater from dual chainring compared to single pinion gear ratio range. Whether minor reduction on the mountain, higher gearing downhill or on long journeys – remain both drivers and the system in an optimal cadence range.
Skidplate: Especially with eMTBs include bouncing or rockfalls, which can seriously damage the deep-seated motor, an everyday occurrence. The Skidplate is useful as a protective device not only from a technical perspective, it also encompasses optical engine.So this is visually part of the frame. The result is a technically perfect tailed motor which, as its standard solution, a non-autogenous part is not, but is a self-evident center of ePerformance bikes.
aluminum 6061, hydroformed, Gravity Casting Interface, thru-axle M12 (1.75) x 148mm, disc brake Postmount, Travel: 150mm
Yamaha PW system – USA, 500W
Yamaha Lithium Ion 500 Wh
Yamaha quick charger 4A
Magura Boltron, air, Travel: 150mm, aluminum steerer tube 1 1/8 “- 1 1/2” tapered
RockShox Monarch RT, air
Deore XT M786 Shadow Plus, 20-speed, Shimano
Shimano Deore XT M786
Shimano Deore XT M780 rapid fire,
Shimano HG50, 11-36 teeth
FSA aluminum, 32-44
Magura MT5, aluminum, 203mm
Schwalbe Nobby Nic Evo SnakeSkin, 70-584
Alexrims MD40, hollow rim, aluminum
|FRONT WHEEL HUB||
XLC Evo disc, thru axle 15×110 boost
|REAR WHEEL HUB||
XLC Evo disc, thru axle 12×148 boost
Haibike Components TheBar ++
XLC lock on grips Sport
Haibike Components TheStem ++, A-Head, bar bore: 31.8mm, 12˚
A-Head Alloy Tapered
Selle Royal Voga
XLC AllMtn, remote, telescope, 31.6mm
XLC freeride platform pedal
As the new 2017 electric bikes roll in, it is our job to ensure that our customers have the very first opportunity available to pre-order their electric bike. Pre-ordering with Propel is made simple. In order to be among the first to get your hands on your 2017 electric bike, a small deposit of $250 is required. For the most up-to-date availability information or to pre-order, please contact [email protected] or give us a call at 718-643-4542.
This electric bike is expected to be available for shipment as early as January of 2017.
Below sizes are recommended as a good starting point when thinking about sizing. Please contact us for recommendations based on your specific needs.
|A||FRAME HEIGHT||40 cm||44 cm||48 cm||52 cm|
|B||SEAT TUBE ANGLE||73 °||73 °||73 °||73 °|
|C||SEAT TUBE OFFSET||–||–||–||–|
|D||SEAT ANGLE||73 °||73 °||73 °||73 °|
|E||HEAD TUBE LENGTH||120 mm||125 mm||130 mm||135 mm|
|F||HEAD TUBE ANGLE||68 °||68 °||68 °||68 °|
|G||TOP TUBE LENGTH (HORIZONTAL)||560 mm||585 mm||610 mm||635 mm|
|H||CHAINSTAY LENGTH||478 mm||478 mm||478 mm||478 mm|
|I||BB DROP||0 mm||0 mm||0 mm||0 mm|
|J||WHEEL BASE||1148 mm||1174 mm||1199 mm||1225 mm|
|K||STACK||617 mm||622 mm||626 mm||631 mm|
|L||REACH||371 mm||395 mm||419 mm||442 mm|